Section 9
Establishing connection and verifying the IEEE C37.118/1344 communication
IEC140000144 V1 EN-US
Figure 16: Captured synchrophasor data
9.5.2
Verifying the IEEE C37.118/1344 UDP communication
After setting both PMU configuration and the UDP client configuration (As explained in sections
Setting the PMU station communication (PMU
(PMU configuration)
Ethernet communication is set up, click
IEC140000145 V1 EN-US
Figure 17:
•
Now it should be possible to see the streaming synchrophasor data.
•
Verify the communication by following the same steps as in section
C37.118/1344 TCP
80
and
Setting the TCP/UDP client
Verifying the UDP communication using PMU Connection Tester
communication.
© Copyright 2017 ABB. All rights reserved
Report),
Setting the PMU station communication
communication) and making sure that the
Connect on the PMU Connection Tester tool.
1MRK 506 371-UUS E
GUID-F0D1117D-3D0F-498F-A00C-242763F8A4E6 v1
IEC140000145-1-en.vsd
Verifying the IEEE
Line distance protection REL670
Commissioning manual