Verifying The Ieee C37.118/1344 Udp Communication - ABB REG670 Commissioning Manual

1MRK 502 073-UUS A
Establishing connection and verifying the IEEE C37.118/1344 communication
IEC140000144 V1 EN-US
Figure 36: Captured synchrophasor data
11.5.2
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062
Commissioning manual

Verifying the IEEE C37.118/1344 UDP communication

After setting both PMU configuration and the UDP client configuration (As explained
in sections Setting the PMU station communication (PMU
station communication (PMU configuration)
communication) and making sure that the Ethernet communication is set up, click
Connect on the PMU Connection Tester tool.
IEC140000145 V1 EN-US
Figure 37: Verifying the UDP communication using PMU Connection Tester
GUID-F0D1117D-3D0F-498F-A00C-242763F8A4E6 v1
Report), Setting the PMU
and Setting the TCP/UDP client
IEC140000145-1-en.vsd
Section 11
121