Section 9
Establishing connection and verifying the IEEE C37.118/1344 communication
IEC140000134 V1 EN-US
1.1.
1.2.
2.
Set the Connection Parameters on PMU Connection Tester for TCP communication according
to the PMU configuration.
IEC140000135 V1 EN-US
72
Navigate to the Settings tab.
Force the IP stack to IPv4 by setting the parameter
© Copyright 2017 ABB. All rights reserved
1MRK 506 371-UUS E
IEC140000134-1-en.vsd
ForceIPv4 to True .
IEC140000135-1-en.vsd
Line distance protection REL670
Commissioning manual