Advertisement
Intel
®
Server System R2000WT Product Family System Integration and Service Guide
Remove Front Control Panel and Front I/O Panel from I/O Bay Module
Note: For this extraction process, the cables do not need to be detached from the assemblies
•
Remove the Front Control Panel fastener screw located on the top right side of the I/O module bay (see
letter 'A')
Carefully extract the Front Control Panel assembly by pulling it out from the back of the I/O Module Bay
•
Remove the two Front I/O Panel fastener screws accessed from the top center of the I/O Module (see
•
letter 'B')
Carefully extract the I/O panel assembly from the front of the I/O module bay. Feed the cables forward
•
from the back of the I/O module bay as you pull out the I/O panel assembly
12
Figure 10. Control Panel and Front I/O Panel Removal from I/O Bay Module
Front Control Panel Board
Front I/O Panel
Advertisement
Need help?
Do you have a question about the R2000WT Series and is the answer not in the manual?