Intel R2000WF Technical Product Specification
  1. Manuals
  2. Brands
  3. Intel Manuals
  4. Server
  5. R2000WF
  6. Technical product specification

Intel R2000WF Technical Product Specification

Product family
Hide thumbs Also See for R2000WF:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Configuration Manual
Intel® Server System R2000WF
Product Family
Technical Product Specification
An overview of product features, functions, architecture, and support specifications
Revision 1.2
November 2017
Intel® Server Products and Solutions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R2000WF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intel R2000WF

Summary of Contents for Intel R2000WF

  • Page 1 Intel® Server System R2000WF Product Family Technical Product Specification An overview of product features, functions, architecture, and support specifications Revision 1.2 November 2017 Intel® Server Products and Solutions...
  • Page 2 <Blank page>...

  • Page 3: Document Revision History

    Edited bullet on the section 4.1.1 Memory Slot Population Requirements  Added subsection 3.3.8 DC Output Specification Updated Trusted Platform Module (China version) iPC AXXTPMCHNE8 on table Intel® Server Board S2600WF product family feature set November 2017 Added TPM definition on Glossary section...
  • Page 4 Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by visiting www.intel.com/design/literature.htm. Intel, the Intel logo, and Xeon are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.

  • Page 5: Table Of Contents

    Intel® Server System R2000WF Product Family Technical Product Specification Table of Contents 1. Introduction ................................15 Document Outline................................16 Intel® Server Board Use Disclaimer......................... 16 Product Errata.................................. 16 2. Server System Family Overview..........................17 System Features Overview ............................21 Server Board Architecture ............................22 Server Board Features Overview ..........................
  • Page 6 System Fans ..................................62 Power Supply Module Fans ............................64 FRUSDR Utility ................................. 64 5. Intel® Xeon Phi™ Coprocessor and Non-Intel GPGPU Add-in Card Support ..........65 Support Criteria ................................65 Intel® Xeon Phi™ Coprocessor Card – System Configuration Requirements ......... 68 6.
  • Page 7 Onboard SATA Software RAID Support ....................... 88 7.2.1 Intel® Rapid Storage Technology Enterprise (Intel® RSTe) 5.0 ..............89 7.2.2 Intel® Embedded Server RAID Technology 2 (ESRT2) 1.60 for SATA ............89 M.2 SSD Support ................................91 7.3.1 Embedded RAID Support ............................91 PCIe NVMe* Drive Support ............................
  • Page 8 Intel® Server System R2000WF Product Family Technical Product Specification 11.3.7 Force-enter BIOS Setup ............................122 11.3.8 Media Redirection ............................... 122 Appendix A. Integration and Usage Tips ......................124 Appendix B. POST Code Diagnostic LED Decoder ..................... 125 B.1. Early POST Memory Initialization MRC Diagnostic Codes ..............126 B.2.
  • Page 9 Figure 5. Server board component/feature identification ....................... 24 Figure 6. Intel® Light Guided Diagnostics – LED identification ....................25 Figure 7. Intel® Light Guided Diagnostics - DIMM fault LEDs ....................26 Figure 8. System configuration and recovery jumpers ......................26 Figure 9.
  • Page 10 Figure 75. SAS expander card installation ........................... 104 Figure 76. Intel® RAID Expander RES3FV288 connector identification ................105 Figure 77. 12 GB internal 36-Port Intel® RAID Expander Card RES3TV360 connector identification ....106 Figure 78. Front I/O panel features ..............................107 Figure 79.
  • Page 11 Intel® Server System R2000WF Product Family Technical Product Specification Figure 83. Full height/full length add-in card support ......................113 Figure 84. Three-slot PCIe* riser card (iPC – A2UL8RISER2) ....................114 Figure 85. Two-slot PCIe riser card (iPC – A2UL16RISER2) ....................114 Figure 86.
  • Page 12 Table 35. Peripheral drive power connector pin-out (“Peripheral PWR”) ................. 53 Table 36. System volumetric airflow, Intel® Server System R2308WFxxx ................ 54 Table 37 . System volumetric airflow, Intel® Server System R2308WFxxx w/Intel® Xeon Phi™ (passive) .... 54 Table 38. System volumetric airflow, Intel® Server System R2312WFxxx ................ 55...
  • Page 13 Intel® Server System R2000WF Product Family Technical Product Specification Table 40 . System volumetric airflow, Intel® Server System R2208WFxxx w/Intel® Xeon Phi™ (passive) .... 55 Table 41. System volumetric airflow, Intel® Server System R2208WFxxx + 8 Drive Acc (16x2.5”) ......55 Table 42 .
  • Page 14 2.5” Dual Port Hot Swap Back Plane (iPN – G97166-xxx) ..................... 165 Table 94. Intel® 2U 2 x 2.5” Rear Hot Swap Back Plane Accessory Kit (iPC – A2UREARHSDK) 2U 2 x 2.5” Rear Hot Swap Back Plane (iPN – G94339-xxx) ........................... 165...

  • Page 15: Introduction

    Intel® Remote Management Module 4 Technical Product Specification Public Intel® Remote Management Module 4 and Integrated BMC Web Console Users Guide Public EPS and EDS documents are made available under NDA with Intel and must be ordered through an Intel representative.

  • Page 16: Document Outline

    (VLSI) and power delivery components that need adequate airflow to cool. Intel ensures through its own chassis development and testing that when Intel server building blocks are used together, the fully integrated system will meet the intended thermal requirements of these components. It is the responsibility...

  • Page 17: Server System Family Overview

    Intel® Server System R2000WF Product Family Technical Product Specification Server System Family Overview The 2U server platforms within the Intel® Server System R2000WF product family offer a variety of system options to meet varied configuration requirements of high-density, high-performance computing environments.
  • Page 18 Server Management  On-board dedicated RJ45 management port  Support for Advanced Server Management features via an Intel® Remote Management Module 4 Lite Accessory Option (iPC – AXXRMM4LITE2)  Intel® Trusted Platform Module 2.0 (Rest of World) – iPC- AXXTPMENC8 (Accessory Option) Security ...

  • Page 19: Table 3. Intel® Server System R2000Wf Product Family Configurations

    Maximum Supported Processor Up to 140 W in all Intel system configuration options Thermal Design Power (TDP) 165 W processors supported on Intel® Server Chassis R2208WFxxxx and R2308WFxxxx configurations only See Thermal Config Tables at end of this document for more information External I/O Connections ...
  • Page 20 Intel® Server System R2000WF Product Family Technical Product Specification Feature Description Drive Bay Options Hot Swap Backplane Options: Note: All available backplane options have support for SAS 3.0 (12 Gb/sec)  8 x 3.5” SAS/ SATA  8 x 2.5” combo backplane – SAS/SATA/NVMe ...

  • Page 21: System Features Overview

    Intel® Server System R2000WF Product Family Technical Product Specification System Features Overview Figure 1. System components overview Most 2U systems within this product family include the standard top cover shown in Figure 2. Figure 2. 2U standard top cover...

  • Page 22: Server Board Architecture

    Intel® Server System R2000WF Product Family Technical Product Specification Server Board Architecture Figure 3. Server Board Architecture...

  • Page 23: Figure 4. S2600Wfq Server Board Architecture

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 4. S2600WFQ Server Board Architecture...

  • Page 24: Server Board Features Overview

    The illustration in Figure 5 provides a general overview of the server board, identifying key feature and component locations. For more information, refer to Intel® Server Board S2600WF Technical Product Specification. Note: Intel® Server Board S2600WFT shown. Some features may not be present on Intel® Server Board S2600WF0. Figure 5. Server board component/feature identification...

  • Page 25: Figure 6. Intel® Light Guided Diagnostics - Led Identification

    Intel® Server System R2000WF Product Family Technical Product Specification The server board includes a number of LEDs to identify system status and/or indicate a component fault. Figure 6 and Figure 7 identify each diagnostic LED and their location. Figure 6. Intel® Light Guided Diagnostics – LED identification...

  • Page 26: Figure 7. Intel® Light Guided Diagnostics - Dimm Fault Leds

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 7. Intel® Light Guided Diagnostics - DIMM fault LEDs Figure 8. System configuration and recovery jumpers...

  • Page 27: Back Panel Features

    Intel® Server System R2000WF Product Family Technical Product Specification Back Panel Features Figure 9. Back panel feature identification Front Control Panel Options Figure 10. Front control panel options...

  • Page 28: Front Drive Bay Options

    Intel® Server System R2000WF Product Family Technical Product Specification Front Drive Bay Options Figure 11. 3.5" x 8 front drive bay configuration – R2308WFxxxx Figure 12. 3.5" x 12 front drive bay configuration – R2312WFxxxx Figure 13. 2.5" x 8 front drive bay configuration – R2208WFxxxx Figure 14.

  • Page 29: Locking Front Bezel Support

    Intel® Server System R2000WF Product Family Technical Product Specification Locking Front Bezel Support The Intel 2U chassis includes features designed into the rack handles and front drive bay by to support a locking front bezel. Note: Intel will not offer a front bezel accessory option. OEMs looking to develop a locking front bezel can obtain necessary CAD files of the chassis from Intel to aid with front bezel development.

  • Page 30: System Dimensional Data

    Intel® Server System R2000WF Product Family Technical Product Specification System Dimensional Data 2.8.1 Chassis Dimensions, 2.5” Drive Bay 3.5” 89 mm 19” 482.6 mm Figure 17. Chassis dimensions, 2.5” drive bay...

  • Page 31: Label Emboss Dimensions

    Intel® Server System R2000WF Product Family Technical Product Specification 2.8.2 Label Emboss Dimensions Figure 18. Label emboss dimensions...

  • Page 32: Pull-Out Tab Label Emboss Dimensions

    Intel® Server System R2000WF Product Family Technical Product Specification 2.8.3 Pull-Out Tab Label Emboss Dimensions 46mm x 26 mm Figure 19. Pull-out tab label emboss dimensions, non-storage models 45 x 19 mm Figure 20. Pull-out tab label area dimensions, storage models...

  • Page 33: System Cable Routing Channels

    Intel® Server System R2000WF Product Family Technical Product Specification System Cable Routing Channels The 2U system provides cable routing channels along each chassis sidewall. No cables should be routed directly in front of the system fans or through the center of the server board between the memory slots and CPU sockets.

  • Page 34: 2.10 Available Rack And Cabinet Mounting Kit Options

    Advisory Note: Available rack and cabinet mounting kits are not designed to support shipment of the server system while installed in a rack. If you chose to do so, Intel advises you verify your shipping configuration with appropriate shock and vibration testing, before shipment.

  • Page 35: 2.11 System Level Environmental Limits

    Note: System configurations that include one or more Intel® Xeon Phi™ co-processor Power Level cards may exhibit sound power levels of up to 8.0 BA. For system configuration requirements and limitations, refer to Appendix D in this document or the Intel® S2600WF Product Family Power Budget and Thermal Configuration Tool.

  • Page 36: 2.12 System Packaging

    Intel® Server System R2000WF Product Family Technical Product Specification 2.12 System Packaging The original Intel packaging is designed to provide protection to a fully configured system and tested to meet International Safe Transit Association (ISTA) Test Procedure 3A (2008). The packaging is also designed to be re-used for shipment after system integration has been completed.

  • Page 37: System Power

    Intel® Server System R2000WF Product Family Technical Product Specification System Power This chapter provides a high level overview of the features and functions related to system power. Power Supply Configurations The server system can have up to two power supply modules installed and can support the following power supply configurations: 1+0 (single power supply), 1+1 redundant power, and 2+0 combined power (non- redundant).

  • Page 38: Power Supply Module Options

    Intel® Server System R2000WF Product Family Technical Product Specification Power Supply Module Options There are three power supply options available for this server product family: 1100W AC 80 Plus Platinum – iPC AXX1100CRPS 1300W AC 80 Plus Titanium – iPC AXX1300TCRPS 750W DC 80 Plus Gold –...

  • Page 39: Power Supply Module Mechanical Overview

    Intel® Server System R2000WF Product Family Technical Product Specification 3.2.2 Power Supply Module Mechanical Overview 1300W AC Power Supply Module 1100W AC Power Supply Module with Dual Fan 750W DC Power Supply Module AC Power Cable Connectors DC Power Cable Connectors Figure 23.

  • Page 40: Figure 24. 1100W Ac Power Supply Module Mechanical Drawing

    Intel® Server System R2000WF Product Family Technical Product Specification Airflow direction FCI 2x25 card 2 mm Retention latch edge connector 10035388-102 185 mm 74 mm 213 mm 11 mm Dual 40x40x28 mm fans 39 mm 8.5 mm Figure 24. 1100W AC power supply module mechanical drawing...

  • Page 41: Power Cord Specification Requirements

    Intel® Server System R2000WF Product Family Technical Product Specification 3.2.3 Power Cord Specification Requirements The AC power cord used must meet the specification requirements listed in the following table. Table 9. AC power cord specifications Cable Type Wire Size 16 AWG Temperature Rating 105ºC...

  • Page 42: Power Factor

    Intel® Server System R2000WF Product Family Technical Product Specification 3.3.1 Power Factor Table 11. AC Power Factor – 1100W Power Supply Output Power 10% load 20% load 50% load 100% load Power Factor > 0.65 > 0.80 > 0.90 > 0.95 Tested at 230 VAC, 50 Hz and 60 Hz and 115 VAC, 60 Hz.

  • Page 43: Ac Line Fuse

    Intel® Server System R2000WF Product Family Technical Product Specification AC line dropout of any duration does not cause tripping of control signals or protection circuits. If the AC dropout lasts longer than the holdup time, the power supply recovers and meets all turn on requirements.

  • Page 44: Susceptibility Requirements

    The power supply meets the following electrical immunity requirements when connected to a cage with an external EMI filter which meets the criteria defined in the SSI document EPS Power Supply Specification. For further information on Intel standards, please request a copy of the Intel Environmental Standards Handbook.

  • Page 45: Power Recovery

    Intel® Server System R2000WF Product Family Technical Product Specification  1100W Power Supply – AC unidirectional wave; 2.6 kV line to ground and 1.3 kV line to line, per EN 55024: 1998/A1: 2001/A2: 2003, EN 61000-4-5: Edition 1.1:2001-04.  1300W Power Supply – AC Unidirectional wave; 2kV line to ground and 1kV line to line, per EN 55024: 1998/A1: 2001/A2: 2003, EN 61000-4-5: Edition 1.1:2001-04 .

  • Page 46: Power Supply Status Led

    Intel® Server System R2000WF Product Family Technical Product Specification when measured at the power connectors of the power supply connector during any single point of fail. The voltage never trips any lower than the minimum levels when measured at the power connector. 12 VSB is auto-recovered after removing OVP limit.

  • Page 47: Dc Input Fuse

    Intel® Server System R2000WF Product Family Technical Product Specification Table 26. DC input rating Parameter Minimum Rated Maximum DC Voltage -40.5 VDC -48 VDC/-60 VDC -75 VDC Input Current 24bA 12.5 A 3.4.2 DC Input Fuse The power supply should have the -48 VDC input fused. The fusing shall be acceptable for all safety agency requirements.

  • Page 48: Susceptibility Requirements

    The power supply shall meet the following electrical immunity requirements when connected to a cage with an external EMI filter which meets the criteria defined in the SSI document EPS Power Supply Specification. For further information on Intel standards, please request a copy of the Intel Environmental Standards Handbook.

  • Page 49: Cold Redundancy Support

    Intel® Server System R2000WF Product Family Technical Product Specification Output Voltage Input Voltage Range Over Current Limits +12V 72 A min/78 A max 12VSB 2.5 A min/3.5 A max 3.4.8.2 Over Voltage Protection (OVP) The power supply over voltage protection shall be locally sensed. The power supply shall shutdown and latch off after an over voltage condition occurs.

  • Page 50: Powering On Cold Standby Supplies During A Fault Or Over Current Condition

    Intel® Server System R2000WF Product Family Technical Product Specification Table 32. Example load share threshold for activating supplies CR_BUS De-Asserted/ Enable Threshold for Disable Threshold for State Asserted States VCR_ON_EN VCR_ON_DIS Standard Redundancy NA; Ignore dc/dc_ active# signal; power supply is always ON...

  • Page 51: Smart Ride Through (Smart)

    Optional 12 V Power Connectors for High Power Add-in Cards The server board includes two white 2x2-pin power connectors that provide supplemental power to high power PCIe x16 add-in cards (Intel® Xeon Phi™ or non-Intel GPGPU) that have power requirements that...

  • Page 52: Hot Swap Backplane Power Connector

    Intel® Server System R2000WF Product Family Technical Product Specification exceed the 75 W maximum power supplied by the PCIe x16 riser slot. A cable from this connector may be routed to a power connector on the given add-in card. Maximum power draw for each connector is 225 W, but is also limited by available power provided by the power supply and the total power draw of the rest of the system.

  • Page 53: Peripheral Power Connector

    Intel® Server System R2000WF Product Family Technical Product Specification 3.8.4 Peripheral Power Connector The server board includes one brown 2x3-pin power connector intended to provide power to various possible peripheral options including: Solid State Devices (SSDs) mounted to the top side of the air duct or to the rear mounted two drive backplane accessory option.

  • Page 54: Thermal Management

    In addition, the CFM data provided using server management utilities that utilize platform sensor data may vary slightly from the data listed in the tables. Note: For system BTU data, see the Intel® Server Board S2600WF Product Family Power Budget and Thermal Configuration Tool.

  • Page 55: Table 38. System Volumetric Airflow, Intel® Server System R2312Wfxxx

    136.2 100% 100% 140.5 auto 69.8 Table 43 . System volumetric airflow, Intel® Server System R2208WFxxx + 8 Drive Acc (16x2.5”) w/Intel® Xeon Phi™ (passive) System Airflow – R2216WFxxx w/Intel Xeon Phi (passive) System Fan PSU Fan Total Airflow (CFM)

  • Page 56: Thermal Operation And Configuration Requirements

    45 °C (ASHRAE A4) with limited performance impact. The configuration requirements and limitations are described in the configuration matrix found in Appendix D of this document or in the Intel® S2600WF Product Family Power Budget and Thermal Configuration Tool available as a download online at: http://www.intel.com/support...

  • Page 57: Memory Slot Population Requirements

    Intel® Server System R2000WF Product Family Technical Product Specification Table 46. PCIe* add-in card airflow (LFM) support limits – R2208WFxxx, R2208WFxxx + 8 drive accessory kit, and R2308WFxxx PCIe* Add-In Slot Riser Slot #1 Riser Slot #2 Riser Slot #3...

  • Page 58: Thermal Management Overview

    When populating a Quad-rank DIMM with a Single- or Dual-rank DIMM in the same channel, the  Quad-rank DIMM must be populated farthest from the processor. Intel MRC will check for correct DIMM placement. A maximum of 8 logical ranks can be used on any one channel, as well as a maximum of 10 physical ranks loaded on a channel.

  • Page 59: Fan Speed Control

    Intel® Server System R2000WF Product Family Technical Product Specification The power supply is protected against over temperature conditions caused by excessive ambient temperature. In an over-temperature protection condition, the power supply module shuts down. Should system thermals increase to a point beyond the maximum thermal limits, the system shuts down, the system status LED changes to solid amber, and the event is logged to the system event log.
  • Page 60 Intel® Server System R2000WF Product Family Technical Product Specification adapter is configured into the system. This enables easier usage of the fan speed control to support Intel as well as third party chassis and better support of ambient temperatures higher than 35 °C.
  • Page 61 Intel® Server System R2000WF Product Family Technical Product Specification Multiple stepwise linear and clamp controls can be defined for each fan domain and used simultaneously. For each domain, the BMC uses the maximum of the domain’s stepwise linear control contributions and the sum of the domain’s clamp control contributions to compute the domain’s PWM value, except that a...

  • Page 62: System Fans

    Intel® Server System R2000WF Product Family Technical Product Specification Available only when PSU has PMBus Calculated estimate Figure 32 shows a high-level representation of the fan speed control structure that determines fan speed. Policy: Sensors: Events:  CLTT  Front panel ...

  • Page 63: Figure 34. System Fan Assembly

    Intel® Server System R2000WF Product Family Technical Product Specification Table 47. System fan connector pin-out Signal Name Signal Name FAN PWM P12V FAN SYS FAN PRSNT FAN TACH LED FAN FAULT All six system fans are mounted within a single fan assembly module, which can be removed for cable routing or to service other components within the chassis.

  • Page 64: Power Supply Module Fans

    Intel® Server System R2000WF Product Family Technical Product Specification Power Supply Module Fans Each installed power supply module includes embedded (non-removable) 40-mm fans. They are responsible for airflow through the power supply module. These fans are managed by the fan control system. Should a fan fail, the power supply shuts down.

  • Page 65: Intel® Xeon Phi™ Coprocessor And Non-Intel Gpgpu Add-In Card Support

    See Appendix D at the end of this document for additional thermal configuration information. Each Intel Xeon Phi coprocessor card and non-Intel GPGPU card must be installed into the top slot of a two- slot PCIe* riser card. With a two-slot riser card installed, the embedded fan speed control operates system fans at a higher speed.

  • Page 66: Figure 36. Auxiliary 12 V Power Cable (Ipc - Axxgpgpucable)

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 36. Auxiliary 12 V power cable (iPC – AXXGPGPUCABLE) Riser slots 1 and 2 are capable of supporting up to 100 W maximum power each. Available power to each add-in card slot on a given riser card is defined by the PCIe* specification. Add-in cards with power requirements above 75 W require the additional power to be drawn from either of two 2x2 pin “OPT_12V_PWR”...

  • Page 67: Figure 38. Shipping Bracket

    PCIe add-in cards with air flow requirement greater than 300 LFM cannot be supported. Systems configured with an Intel Xeon Phi card and/or non-Intel GPGPU card must have a shipping bracket installed before the system is exposed to any level of shock or vibration or is transported to the end user location.

  • Page 68: Intel® Xeon Phi™ Coprocessor Card - System Configuration Requirements

    For optimum system performance and proper fan speed control, ensure the following BIOS setup utility options are set: MMIO over 4 GB = Enabled • MMIO Size = 256 GB • Intel highly recommends that the latest available system software be installed. The latest system update package can be downloaded from http://downloadcenter.intel.com.

  • Page 69: System Storage And Peripheral Drive Bay Overview

    Intel® Server System R2000WF Product Family Technical Product Specification System Storage and Peripheral Drive Bay Overview The Intel® Server System R2000WF product family has support for a variety of different storage options including:  Support for 8, 16, or 24 front mount hot swap 2.5” SAS/SATA/NVMe* drives, ...

  • Page 70: Figure 42. 3.5" Drive Bay, 8 Drive Configuration

    Intel® Server System R2000WF Product Family Technical Product Specification The 2U product family also includes options to support 8 and 12 front mounted 3.5” drives. System configured with eight devices also include front panel I/O. Note: 3.5” drive trays in the 8 and 12 drive system configurations are capable of supporting 3.5” drives or 2.5”...

  • Page 71: Hot Swap Drive Carriers

    Intel® Server System R2000WF Product Family Technical Product Specification Hot Swap Drive Carriers Each SAS/SATA/NVMe* drive that interfaces with a backplane is mounted to a tool-less hot swap drive carrier. Drive carriers include a latching mechanism used to assist with drive extraction and drive insertion.

  • Page 72: Figure 46. Drive Tray Led Identification

    Intel® Server System R2000WF Product Family Technical Product Specification Note: Due to degraded performance and reliability concerns, the use of the 3.5” drive blank as a 2.5” drive bracket is intended to support SSD type storage devices only. Installing a 2.5” hard disk drive into the 3.5”...

  • Page 73: Peripheral Power Sources

    Intel® Server System R2000WF Product Family Technical Product Specification Note: The drive activity LED is driven by signals coming from the drive itself. Drive vendors may choose to operate the activity LED different from what is described in the table above. Should the activity LED on a given drive type behave differently than what is described, customers should reference the drive vendor specifications for the specific drive model to determine the expected drive activity LED operation.

  • Page 74: Figure 48. 3.5" Backplane Placement

    Intel® Server System R2000WF Product Family Technical Product Specification The 3.5” drive backplanes are fixed mounted to the back of the drive bay within the chassis (as shown in the following diagram). Figure 48. 3.5" backplane placement All 2.5” drive backplane options are mounted to a drive bay module that either slide into open bays within the front of the chassis or is mounted to a fixed mount bay in the rear of the chassis as shown below.

  • Page 75: Sgpio Functionality

    Intel® Server System R2000WF Product Family Technical Product Specification  LEDs to indicate drive activity and status for each attached device  Device presence detect inputs to the microcontroller  5 V VR for devices  3.3 V VR for microcontroller ...

  • Page 76: Figure 51. 8 X 2.5" Sas/Sata/Nvme* Hot Swap Backplane, Back Side

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 51. 8 x 2.5" SAS/SATA/NVMe* hot swap backplane, back side I2C cable connectors – The backplane includes two 1x5 cable connectors (labeled I2C_IN and I2C_OUT) used as a management interface between the server board and the installed backplanes. In systems...

  • Page 77: X 2.5" Drive Dual Port Sas Backplane

    Intel® Server System R2000WF Product Family Technical Product Specification server board (on-board SATA only), from installed add-in SAS/SATA RAID cards, or from an optionally installed SAS expander card for drive configurations of greater than eight hard drives. Power harness connector– The backplane includes a 2x2 connector supplying power to the backplane.

  • Page 78: Figure 54 . 8 X 2.5" Dual Port Sas Backplane, Back Side

    Intel® Server System R2000WF Product Family Technical Product Specification Note: Letters in parenthesis denote references to connectors on the back side of the backplane as illustrated in Figure 52. – I2C-out cable connector for multi-backplane support – Ports 0-3 (primary) mini-SAS HD cable connector –...

  • Page 79: X 3.5" Drive Hot-Swap Backplane Overview

    Intel® Server System R2000WF Product Family Technical Product Specification I2C cable connectors (connectors A and F) – The backplane includes two 1x5 cable connectors used as a management interface between the server board and the installed backplanes. In systems configured with multiple backplanes, a short jumper cable is attached between backplanes, with connector A used on the first board and connector F used on the second board, extending the SMBus to each installed backplane.

  • Page 80: 12 X 3.5" Drive Hot-Swap Backplane Overview

    Intel® Server System R2000WF Product Family Technical Product Specification Power harness connector (connector A) – The backplane includes a 2x2 connector supplying power to the backplane. Power is routed to the backplane via a power cable harness from the server board Multi-port mini-SAS HD cable connectors (connectors B and C) –...

  • Page 81: X 2.5" Hot Swap Drive Bay Accessory Kit

    Intel® Server System R2000WF Product Family Technical Product Specification – Ports 8-11 mini-SAS HD cable connector – I2C connector – Ports 4-7 mini-SAS HD cable connector – PCIe* SSD connector SSD0 – Ports 0-3 mini-SAS HD cable connector – PCIe* SSD connector SSD1 –...

  • Page 82: Figure 58. 2 X 2.5" Rear Mount Backplane Kit Placement

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 58. 2 x 2.5" rear mount backplane kit placement Supported SATA SSDs must not exceed the following power and thermal limits:  One or two SATA SSDs supporting up to 4 W per device with a case temperature rating of 70 °C ...

  • Page 83: Figure 59. 2 X 2.5" Hot Swap Backplane

    Intel® Server System R2000WF Product Family Technical Product Specification Activity and SATA drive status LEDs connectors Drive 1 SGPIO Power HSBP_I2C Drive 0 Figure 59. 2 x 2.5" hot swap backplane  Activity/status LEDs – The backplane includes LEDs for both activity and status for each drive.
  • Page 84 Intel® Server System R2000WF Product Family Technical Product Specification  Power connector – The backplane includes a 2x3 pin power connector. The following table defines the pin-out for this connector: Table 57. Power connector pin-out Signal P12V P3V3  I2C connector – The backplane includes a 1x5 pin I2C connector. This connector is cabled to a matching HSBP I2C connector on the server board and is used as a communication path to the onboard BMC.

  • Page 85: 6.10 Internal Fixed Mount Solid State Drive (Ssd) Support

    Intel® Server System R2000WF Product Family Technical Product Specification 6.10 Internal Fixed Mount Solid State Drive (SSD) Support The system can support up to two internal fixed mount 2.5” solid state drives (SSDs). Each drive is attached to the top side of the air duct as illustrated below.

  • Page 86: Storage Controller Options Overview

    Intel® Server System R2000WF Product Family Technical Product Specification Storage Controller Options Overview The Intel® Server System R2000WF product family has support for a variety of storage controller and storage device options including:  Onboard SATA support  Embedded software RAID support ...
  • Page 87 Intel® Server System R2000WF Product Family Technical Product Specification Table 60. SATA and sSATA controller feature support RAID Mode RAID Mode Feature Description AHCI Mode Intel® RSTe Intel® ESRT2 Native Command Allows the device to reorder commands for more Supported...

  • Page 88: Staggered Disk Spin-Up

    Staggered Disk Spin-Up Because of the high density of disk drives that can be attached to the Intel® C620 onboard AHCI SATA controller and the sSATA controller, the combined startup power demand surge for all drives at once can be much higher than the normal running power requirements and could require a much larger power supply for startup than for normal operations.

  • Page 89: Intel® Rapid Storage Technology Enterprise (Intel® Rste) 5.0

    RAID 10 – A combination of RAID 0 and RAID 1, consists of striped data across mirrored spans. It provides high data throughput and complete data redundancy but uses a larger number of spans. By using Intel RSTe, there is no loss of PCI resources (request/grant pair) or add-in card slot. Intel RSTe functionality requires the following: ...

  • Page 90: Figure 63. Esrt2 Sata Raid-5 Upgrade Key

    RAID 5: Uses disk striping and parity data across all drives (distributed parity) to provide high data throughput, especially for small random access. Intel Embedded Server RAID Technology 2 on this server board supports a maximum of six drives which is the maximum onboard SATA port support.

  • Page 91: M.2 Ssd Support

    Figure 64. M.2 module connector locations Each M.2 connector can support PCIe* or SATA modules that conform to a 2280 (80 mm) form factor. PCIe bus lanes for each connector are routed from the Intel chipset and can be supported in single processor configurations.

  • Page 92: Pcie Nvme* Drive Support

    Intel® Server System R2000WF Product Family Technical Product Specification PCIe NVMe* Drive Support Several system models within the Intel® Server System R2000WF product family have support for PCIe NVMe drives installed into the front drive bays. For system models supporting 12x3.5” drives, the front drive bay can support up to two (2) NVMe drives.

  • Page 93: Figure 66. Nvme* Storage Bus Event/Error Handling

    Enabling Intel® VMD support In order for installed NVMe devices to utilize the Intel® VMD features of the server board, Intel VMD must be enabled on the appropriate CPU PCIe root ports in BIOS setup. By default, Intel VMD support is disabled on...
  • Page 94 Intel® Server System R2000WF Product Family Technical Product Specification The following table provides the PCIe root port mapping for all on-board PCIe devices, OCuLink Connectors and Riser Card slots. Table 62. CPU - PCIe* port routing CPU 1 CPU 2...

  • Page 95: Figure 67. Vmd Support Disabled In Bios Setup

    Intel® Server System R2000WF Product Family Technical Product Specification In BIOS setup, the Intel VMD support menu can be found under the following BIOS setup menu: Advanced -> PCI Configuration -> Volume Management Device Figure 67. VMD support disabled in BIOS setup...

  • Page 96: Intel® Virtual Raid On Chip (Intel® Vroc) For Nvme

    Intel® Server System R2000WF Product Family Technical Product Specification 7.4.3 Intel® Virtual RAID on Chip (Intel® VROC) for NVMe* Intel® Virtual RAID on Chip (Intel® VROC) enables NVMe* boot on RAID and volume management (Intel® RSTe 5.0 + Intel® VMD) Figure 69. Intel® VROC basic architecture overview Intel®...

  • Page 97: Nvme* Drive Population Rules For Intel® Vroc

    In order to support NVMe RAID and NVMe Management features, the optional Intel® VROC Key must be installed on to the server board. With the Intel VROC key installed, specific drive population rules exist and must be followed for proper support of the NVMe management features.

  • Page 98: Figure 71. Backplane Cabling From Two Pcie Sources

    PCIe source are applied to the drive set connected to it 7.4.4.1 Onboard PCIe OCuLink Connectors and / or Intel Tri-mode RAID module to 8 x 2.5” Combo Backplane The following information is applicable when PCIe signal to the 8x2.5” combo backplane are cabled from the PCIe OCuLink connectors located on the server board and/or an optionally installed Intel®...
  • Page 99 PCIe Source Drive Set The following illustrations identify supported and unsupported drive populations associated with any defined drive pair of the 8x2.5” combo backplane when Intel VROC is used for NVMe drive management. Where 1 Drive = drive connectors 0, 2, 4, or 6 and 2 Drive = drive connectors 1, 3, 5, or 7 Note: The NVMe drive population rules defined above are only applicable when the Intel®...
  • Page 100 The following illustrations identify supported and unsupported drive populations associated with any defined drive set of the 8x2.5” combo backplane when an Intel® VROC key is installed to the server board and the PCIe source to the backplane is from an add-in PCIe Switch card.

  • Page 101: Intel® Integrated Raid Module Support

    NVMe drive management. Intel® Integrated RAID Module Support The system has support for many Intel and third-party PCIe* add-in 12 Gb RAID adapters which can be installed in available PCIe add-in cards slots. For system configurations with limited add-in card slot availability, an optional Intel®...

  • Page 102: Raid Maintenance Free Backup Unit (Axxrmfbux) Support

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 72. Intel® Integrated RAID Module For a list of supported Intel Integrated RAID Module options, please visit the Intel® Server Configurator Tool at https://serverconfigurator.intel.com. Note: Intel Integrated RAID Modules cannot be supported in systems configured with a CPU #1 processor that supports the Integrated®...

  • Page 103: Intel® Raid Expander Card Support

    Note: The two RMFBU node mounting plates cannot be installed if a full length PCIe add-in card is installed in the adjacent riser card or if the Intel® Xeon Phi™ shipping bracket is installed in the system. Intel® RAID Expander Card Support System configurations consisting of more than eight SAS drives may require the addition of an SAS expander card.

  • Page 104: Figure 75. Sas Expander Card Installation

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 75. SAS expander card installation In the 2U 12x3.5” system configuration, the SAS expander must be installed in any available PCIe add-in slot. Intel makes available the following RAID expander cards.

  • Page 105: Figure 76. Intel® Raid Expander Res3Fv288 Connector Identification

    (4) HD-HD 165 mm, (1) HD-HD 300 mm, (1) HD-HD 250 mm; (3) rubber pads; mounting screws. For additional information on Intel RAID Expander Cards, please refer to the appropriate Intel RAID Expander Card User Guide. Figure 76. Intel® RAID Expander RES3FV288 connector identification...

  • Page 106: Figure 77. 12 Gb Internal 36-Port Intel® Raid Expander Card Res3Tv360 Connector Identification

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 77. 12 GB internal 36-Port Intel® RAID Expander Card RES3TV360 connector identification See the Intel® Server S2600WF Product Family Configuration Guide for SAS cabling requirements. For system cable routing diagrams, see Appendix A.

  • Page 107: Front Control Panel And I/O Panel Overview

    Note: Due to signal strength limits associated with USB 3.0 ports cabled to a front panel, some marginally compliant USB 3.0 devices may not be supported from these ports. In addition, server systems based on the Intel® Server Board S2600WF cannot be USB 3.0 certified with USB 3.0 ports cabled to a front panel.

  • Page 108: Control Panel Features

    Intel® Server System R2000WF Product Family Technical Product Specification Control Panel Features The system includes a control panel that provides push button system controls and LED indicators for several system features. Depending on the hard drive configuration, the front control panel may come in either of two formats;...
  • Page 109 Intel® Server System R2000WF Product Family Technical Product Specification Table 65. System status LED state definitions LED State System State BIOS Status Description System is not operating.  System AC power is off.  System is in EuP Lot6 off mode.
  • Page 110 Intel® Server System R2000WF Product Family Technical Product Specification Solid amber Critical/non-recoverable –  CPU CATERR signal asserted. system is halted. Fatal alarm –  MSID mismatch detected (CATERR also asserts for this case). system has failed or shut  CPU 1 is missing.

  • Page 111: Pcie* Riser Card Support

    Intel® Server System R2000WF Product Family Technical Product Specification PCIe* Riser Card Support The server board provides three riser card slots identified as: Riser Slot #1, Riser Slot #2, and Riser Slot #3. Per the PCIe* specification, each riser card slot can support a maximum 75 W of power. The PCIe bus interface for each riser card slot is supported by each of the two installed processors.

  • Page 112: Riser Card Assembly

    Note: Riser Slot# 3 does not support SMBus device aliasing. SMBus aliasing prevents devices with common address requirements from conflicting with each other. Intel recommends that any PCIe add-in card requiring SMBus support be installed into any available add-in card slot on either Riser #1 or Riser #2.

  • Page 113: Figure 82. Left And Right Views Of Riser Card #2 And #3 Bracket

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 82. Left and right views of riser card #2 and #3 bracket Depending on the riser card option installed, riser slots #1 and #2 can each support up to two full height, full length add-in cards (top and middle slots on each riser) and one full height, half-length add-in card (bottom slot on each riser).

  • Page 114: Riser Slot #1 And Riser Slot #2 Riser Card Options

    Intel® Server System R2000WF Product Family Technical Product Specification Note: Different system models within this 2U product family have different PCIe* add-in card population requirements based on supported air flow limits. See section 4.1 for more information. System integrators should identify PCI add-in card air flow requirements from vendor specifications when integrating any add-in card into the system, to ensure the chosen PCIe* add-in card slot can meet the card’s air flow requirements.

  • Page 115: Riser Slot #3 Riser Card Option (Ipc - A2Ux8X4Riser)

    Intel® Server System R2000WF Product Family Technical Product Specification Riser Slot #3 Riser Card Option (iPC – A2UX8X4RISER) Riser slot #3 is provided to support up to two additional PCIe* add-in card slots for 2U server configurations. The available riser card option is designed to support low profile add-in cards only.

  • Page 116: 10. Ocp* Compatible Intel® Ethernet Network Adapter Support

    Quad Port, 1GB, RJ45 I357T4OCPG1P5 Quad Port, SFP+ X527DA4OCPG1P5 Dual Port, SFP+ (WFT Boards Only) X527DA2OCPG1P5 Dual Port, 10Gb RJ45 (WFT Boards Only) X557T2OCPG1P5 Note: Only dual port SFP+ and dual port 10GB RJ45 OCP modules are supported on Intel® Server Board S2600WFT.

  • Page 117: 11. Basic And Advanced Server Management Features

    RMM4 Lite 2 Activation Key Enables KVM & media redirection When the BMC firmware initializes, it attempts to access the Intel RMM4 Lite. If the attempt to access Intel RMM4 Lite is successful, then the BMC activates the advanced features.

  • Page 118: 11.1 Dedicated Management Port

    Intel® Server System R2000WF Product Family Technical Product Specification On the server board, the Intel RMM4 Lite key is installed at the following location. Figure 88. Intel® RMM4 Lite activation key placement 11.1 Dedicated Management Port The server board includes a dedicated 1 GbE, RJ45 management port. The management port is active with or without the RMM4 Lite key installed.
  • Page 119 Intel® Server System R2000WF Product Family Technical Product Specification The embedded web user interface supports strong security (authentication, encryption, and firewall sup- port) since it enables remote server configuration and control. The user interface presented by the em- bedded web user interface shall authenticate the user before allowing a web session to be initiated.

  • Page 120: Advanced Management Feature Support (Intel® Rmm4 Lite)

    Keyboard, Video, Mouse (KVM) Redirection The BMC firmware supports keyboard, video, and mouse redirection (KVM) over LAN. This feature is available remotely from the embedded web server as a Java applet. This feature is only enabled when the Intel ®...

  • Page 121: Remote Console

    Intel® Server System R2000WF Product Family Technical Product Specification KVM redirection includes a “soft keyboard” function. The “soft keyboard” is used to simulate an entire keyboard that is connected to the remote system. The “soft keyboard” functionality supports the following layouts: English, Dutch, French, German, Italian, Russian, and Spanish.

  • Page 122: Availability

    Intel® Server System R2000WF Product Family Technical Product Specification The redirection of KVM over IP is performed in parallel with the local KVM without affecting the local KVM operation. 11.3.4 Availability The remote KVM session is available even when the server is powered off (in stand-by mode). No restart of the remote KVM session shall be required during a server reset or power on/off.
  • Page 123 5124 – CD Redirection (Secure)  5127 – FD Redirection (Secure)  7578 – Video Redirection  7582 – Video Redirection (Secure)  For additional information, reference the Intel® Remote Management Module 4 and Integrated BMC Web Console Users Guide.

  • Page 124: Appendix A. Integration And Usage Tips

    Intel® Server System R2000WF Product Family Technical Product Specification Appendix A. Integration and Usage Tips This section provides a list of useful information that is unique to the Intel® Server System R2000WF product family and should be kept in mind while configuring your server system.

  • Page 125: Appendix B. Post Code Diagnostic Led Decoder

    Intel® Server System R2000WF Product Family Technical Product Specification Appendix B. POST Code Diagnostic LED Decoder As an aid in troubleshooting a system hang that occurs during a system POST process, the server board includes a bank of eight POST code diagnostic LEDs on the back edge of the server board.

  • Page 126: Early Post Memory Initialization Mrc Diagnostic Codes

    Intel® Server System R2000WF Product Family Technical Product Specification B.1. Early POST Memory Initialization MRC Diagnostic Codes Memory initialization at the beginning of POST includes multiple functions: discovery, channel training, validation that the DIMM population is acceptable and functional, initialization of the IMC and other hardware settings, and initialization of applicable RAS configurations.
  • Page 127 Intel® Server System R2000WF Product Family Technical Product Specification Should a major memory initialization error occur, preventing the system from booting with data integrity, a beep code is generated, the MRC displays a fatal error code on the diagnostic LEDs, and a system halt command is executed.
  • Page 128 Intel® Server System R2000WF Product Family Technical Product Specification Table 78. MRC fatal error codes Diagnostic LED Decoder 1 = LED On, 0 = LED Off Checkpoint Upper Nibble Lower Nibble Description LED # MRC Fatal Error Codes No Usable Memory Error: 01h = No memory was detected via SPD read, or invalid config that causes no operable memory.

  • Page 129: Bios Post Progress Codes

    Intel® Server System R2000WF Product Family Technical Product Specification B.2. BIOS POST Progress Codes The following table provides a list of all POST progress codes. Table 79. POST progress codes Diagnostic LED Decoder 1 = LED On, 0 = LED Off...
  • Page 130 Intel® Server System R2000WF Product Family Technical Product Specification Diagnostic LED Decoder 1 = LED On, 0 = LED Off Checkpoint Upper Nibble Lower Nibble Description LED # DXE Phase DXE Core started DXE Setup Init DXE PCI Host Bridge Init...
  • Page 131 Intel® Server System R2000WF Product Family Technical Product Specification Diagnostic LED Decoder 1 = LED On, 0 = LED Off Checkpoint Upper Nibble Lower Nibble Description LED # DXE SCSI detect DXE SCSI enable DXE SETUP start DXE SETUP input wait...

  • Page 132: Appendix C. Post Code Errors

    Pause” option setting in the BIOS setup does not have any effect on this error. Note: The POST error codes in the following table are common to all current generation Intel server platforms. Features present on a given server board/system determine which of the listed error codes are...
  • Page 133 Intel® Server System R2000WF Product Family Technical Product Specification Table 80. POST Error Messages and Handling...
  • Page 134 Intel® Server System R2000WF Product Family Technical Product Specification Error Code Error Message Action message Response 0012 System RTC date/time not set Major 0048 Password check failed Please put right password. Major 0140 PCI component encountered a PERR error Major...
  • Page 135 Intel® Server System R2000WF Product Family Technical Product Specification 8501 Memory Population Error Please plug DIMM at right population. Major 8520 Memory failed test/initialization CPU1_DIMM_A1 please remove the disabled DIMM. Major 8521 Memory failed test/initialization CPU1_DIMM_A2 please remove the disabled DIMM.
  • Page 136 Intel® Server System R2000WF Product Family Technical Product Specification 8544 Memory disabled.CPU1_DIMM_B2 please remove the disabled DIMM. Major 8545 Memory disabled.CPU1_DIMM_B3 please remove the disabled DIMM. Major 8546 Memory disabled.CPU1_DIMM_C1 please remove the disabled DIMM. Major 8547 Memory disabled.CPU1_DIMM_C2 please remove the disabled DIMM.
  • Page 137 Intel® Server System R2000WF Product Family Technical Product Specification 8565 Memory encountered a Serial Presence Detection(SPD) Major failure.CPU1_DIMM_B3 8566 Memory encountered a Serial Presence Detection(SPD) Major failure.CPU1_DIMM_C1 8567 Memory encountered a Serial Presence Detection (SPD) Major failure.CPU1_DIMM_C2 8568 Memory encountered a Serial Presence Detection (SPD) Major failure.CPU1_DIMM_C3...
  • Page 138 Intel® Server System R2000WF Product Family Technical Product Specification 857C Memory encountered a Serial Presence Detection(SPD) Major failure.CPU2_DIMM_B2 857D Memory encountered a Serial Presence Detection(SPD) Major failure.CPU2_DIMM_B3 857E Memory encountered a Serial Presence Detection(SPD) Major failure.CPU2_DIMM_C1 857F Memory encountered a Serial Presence Detection(SPD) Major failure.CPU2_DIMM_C2...
  • Page 139 Intel® Server System R2000WF Product Family Technical Product Specification 85DF Memory disabled.CPU2_DIMM_H3 please remove the disabled DIMM. Major 85E0 Memory encountered a Serial Presence Detection(SPD) Major failure.CPU2_DIMM_C3 85E1 Memory encountered a Serial Presence Detection (SPD) Major failure. CPU2_DIMM_D1 85E2 Memory encountered a Serial Presence Detection (SPD) Major failure.CPU2_DIMM_D2...

  • Page 140: Post Error Beep Codes

    Codes that are common across all Intel® Server Systems that use same generation chipset are listed in the following table. Each digit in the code is represented by a sequence of beeps whose count is equal to the digit.

  • Page 141: Appendix D. System Configuration Table For Thermal Compatibility

    9. The Intel® RAID Maintenance Free Backup Unit (AXXRMFBUx) can support a case temperature of up to 45°C with the system operating in normal mode and up to 55°C with the system operating in a fan fail mode. The case temperature of Intel® Smart RAID Battery (AXXRSBBUx) can support up to 45°C in both normal and fan fail mode.
  • Page 142 Intel® Server System R2000WF Product Family Technical Product Specification 16. See TPS for thermal limitations. 17. Intel NVME drives used for thermal testing. 18. PSU 2 supported up to max CPU TDP of 165 W. 19. PSU 2 supported up to max CPU TDP of 140 W.
  • Page 143 Intel® Server System R2000WF Product Family Technical Product Specification 173 W Intel® Xeon® Platinum 8176F _28C ● Intel® Xeon® Platinum 8176 _28C ● ● Intel® Xeon® Platinum 8170_26C ● ● 165 W Intel® Xeon® Gold 6150_18C ● ● ● Intel® Xeon® Platinum 8170F_26C ●...
  • Page 144 Intel® Server System R2000WF Product Family Technical Product Specification Intel® Xeon® Platinum 8156_4C ● ● ● ● ● ● ● ● ● ● Intel® Xeon® Gold 5120_14C ● ● ● ● ● ● ● ● ● Intel® Xeon® Gold 5118_12C ●...
  • Page 145 Intel® Server System R2000WF Product Family Technical Product Specification Cache Offload Module (rated to 55C) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Rated to 60C Internal SSD ● ● ● ●...
  • Page 146 Intel® Server System R2000WF Product Family Technical Product Specification Thermal Configuration Matrix Normal Operating Mode Xeon PHI Computing Xeon PHI Computing Optimized: Base System SKUs: Optimized: "●" = Full Support without limitation R2308 WF R2208 WF R2208WF "4,5" (Cell with number) = Conditional...
  • Page 147 Intel® Server System R2000WF Product Family Technical Product Specification Intel® Xeon® Gold 6136_12C ● ● ● ● ● ● ● ● ● ● Intel® Xeon® Platinum 8158_12C ● ● ● ● ● ● ● ● ● ● Intel® Xeon® Gold 6142_16C ●...
  • Page 148 Intel® Server System R2000WF Product Family Technical Product Specification RDIMM-2Rx8,1Rx4, 1Rx8 ● ● ● ● ● ● ● ● ● ● ● ● Memory Type RDIMM-DRx4 ● ● ● ● ● ● ● ● ● ● ● ● (See Note 23) LRDIMM-QRx4 DDP ●...
  • Page 149 Intel® Server System R2000WF Product Family Technical Product Specification 800GB ● PCIe SSD AIC 600GB ● ● ● ● 400GB ● ● ● ● P3700/P3500) (See Note 8) 200GB ● ● ● ● ● ● ● ● ● ● Active Cooling up to 300W ●...
  • Page 150 Intel® Server System R2000WF Product Family Technical Product Specification Table 84. Thermal configuration table for system in “fan fail” operating mode Thermal Configuration Matrix Fan Fail Operating Mode Base System SKUs Base System SKUs: Base System SKUs: R2308 WF Base System SKUs: "●"...
  • Page 151 Intel® Server System R2000WF Product Family Technical Product Specification Intel® Xeon® Gold 6148_20C Intel® Xeon® Gold 6136_12C Intel® Xeon® Platinum 8158_12C Intel® Xeon® Gold 6142_16C Intel® Xeon® Gold 6132_14C Intel® Xeon® Gold 6152_22C 140 W Intel® Xeon® Gold 6140_18C Intel® Xeon® Gold 6138F_20C ●...
  • Page 152 Intel® Server System R2000WF Product Family Technical Product Specification Intel® Xeon® Silver 4112_4C ● ● ● ● ● ● ● ● ● ● RDIMM-2Rx8,1Rx4, 1Rx8 ● ● ● ● ● ● ● ● ● ● Memory Type RDIMM-DRx4 ● ●...
  • Page 153 Intel® Server System R2000WF Product Family Technical Product Specification 1600GB/2TB 800GB PCIe SSD AIC 600GB ● ● ● ● ● P3700/P3500) 400GB ● ● ● ● ● (See Note 8) 200GB ● ● ● ● ● ● ● ● ●...
  • Page 154 Intel® Server System R2000WF Product Family Technical Product Specification (See Notes 2,6) 1100W AC ● ● ● ● Intel Xeon Platinum 8180_28C ● 205 W Intel Xeon Platinum 8168_24C ● 200 W Intel Xeon Gold 6154_18C ● 173 W Intel® Xeon® Platinum 8176F _28C ●...
  • Page 155 Intel® Server System R2000WF Product Family Technical Product Specification Intel® Xeon® Gold 6126_12C ● ● ● ● ● ● ● 115 W Intel® Xeon® Gold 6128_6C ● ● ● ● ● ● ● 113 W Intel® Xeon® Gold 5117F_14C ●...
  • Page 156 Intel® Server System R2000WF Product Family Technical Product Specification Dual SFP+ Cascade Canal ● ● ● ● ● ● ● ● Quad SFP+ Cascade Canal ● ● ● ● ● ● ● ● 1GBase-T Quad Main Canal ● ● ●...
  • Page 157 Intel® Server System R2000WF Product Family Technical Product Specification Intel Confidential...

  • Page 158: Appendix E. System Cable Routing Diagrams

    Intel® Server System R2000WF Product Family Technical Product Specification Appendix E. System Cable Routing Diagrams Figure 91. R2308WFxxx system cable routing diagram Intel Confidential...

  • Page 159: Figure 92. R2208Wfxxx System Cable Routing Diagram

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 92. R2208WFxxx system cable routing diagram Intel Confidential...

  • Page 160: Figure 93. R2312Wfxxx System Cable Routing Diagram

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 93. R2312WFxxx system cable routing diagram Intel Confidential...

  • Page 161: Figure 94. R2208Wfxxx + 8 Drives System Cable Routing Diagram

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 94. R2208WFxxx + 8 drives system cable routing diagram Intel Confidential...

  • Page 162: Figure 95. R2224Wfxxx System Cable Routing Diagram

    Intel® Server System R2000WF Product Family Technical Product Specification Figure 95. R2224WFxxx system cable routing diagram Intel Confidential...

  • Page 163: Appendix F. Statement Of Volatility

    BMC: The server boards support an Intelligent Platform Management Interface (IPMI) 2.0 conformant baseboard management controller (BMC). The BMC provides health monitoring, alerting and remote power control capabilities for the Intel® Server Board. The BMC does not have access to operating system level data.
  • Page 164 Intel® Server System R2000WF Product Family Technical Product Specification Table 85. Intel® Server Board S2600WF (iPN – H48104-xxx) Component Type Size Board location User Data Name Non-Volatile 64MB U3D1 No(BIOS) BIOS Flash Non-Volatile 64MB U1D1 No(FW) BMC Flash Non-Volatile U5M1...

  • Page 165: Dual Port Hot Swap Back Plane (Ipn – G97166-Xxx)

    16384x8 U3A1 PSOC / Microcontroller / FRU Table 94. Intel® 2U 8 x 2.5” Dual Port Hot Swap Back Plane Accessory Kit (iPC – A2U8X25S3DPDK) 2U 8 x 2.5” Dual Port Hot Swap Back Plane (iPN – G97166-xxx) Component Type...

  • Page 166: Glossary

    Intel® Server System R2000WF Product Family Technical Product Specification Glossary Term Definition Baseboard Management Controller BIOS Basic Input/Output System CMOS Complementary Metal-oxide-semiconductor Central Processing Unit DDR4 Double Data Rate 4th edition DIMM Dual In-line Memory Module DIMMs per Channel External Design Specification...
  • Page 167 Intel® Server System R2000WF Product Family Technical Product Specification Technical Product Specification Intel® TXT Intel® Trusted Execution Technology for servers VLSI Very Large Scale Integration Voltage Standby Intel® VROC Intel® Virtual RAID on CPU Intel Confidential...

Table of Contents