Advertisement
Intel
®
Server System R2000WT Product Family System Integration and Service Guide
To remove the fan assembly:
Lift the latches located on each end of the fan assembly until each latch is fully disengaged from the latch
•
receivers on the chassis side wall.
Grasp each end of the fan assembly and pull straight up until the assembly is fully disengaged from the
•
assembly receivers on the chassis side wall.
Carefully place the fan assembly face down onto a flat surface. Do NOT rest the fan assembly on the fan
•
connectors located on the bottom side of the fan assembly. Doing so may damage the connectors.
6
Figure 4. System Fan Assembly Removal
Advertisement
Need help?
Do you have a question about the R2000WT Series and is the answer not in the manual?