Otto Bock Empower 1A1-1 Instructions For Use Manual page 39

Class II Electrical device
Please note the instructions for use
Polarity
Humidity limits for storage/transport
Temperature limits for storage/transport
IP##
Ingress protection classification
12 Technical data
Sizes [cm]
Heel height [mm]
System height with footshell [mm]
Structural height with footshell [mm]
Range of motion, plantar flexion [°]
Product weight without footshell [g]
Product weight with footshell [g]
Max. body weight [kg]
Mobility grade
Battery and battery charger
Battery type
Battery charging temperature [°C]
Battery capacity [Wh]
Battery output voltage (nominal) [V]
Battery service life (depending on use) [months]
Battery charger operating temperature [°C]
Battery charger supply voltage [V, Hz]
Battery charger input voltage [V]
Battery charger voltage input current [A]
Charging current [A]
12.1 EMC information
Directive and manufacturer's declaration – electromagnetic emissions
The prosthetic foot is intended for use in the electromagnetic environment described below. The customer or user must ensure
that it is operated in such an environment.
Emission test
HR emissions CISPR
11
Empower 1A1-1
Compliance
Group 2
intended function. This may affect electronic devices located nearby.
25 26 27
200 200 200
220 220 220
Size 27: approx. 2000
Size 27: approx. 2200
100 V to 240 V AC 50 Hz to 60 Hz
Electromagnetic environment – directive
The prosthetic foot emits electromagnetic power to carry out its
Technical data
28 29
10
202 202
225 225
22
130
3 and 4
Lithium-ion
5 to 45
45
18
12
0 to 40
23 to 26
Max. 3.75
2.5
30
202
225
39