7.
Remove the plug from the oil pan (1) and connect the
two oil hoses (2) to the oil pan. Secure with the banjo
bolt (3).
8.
Secure the gearbox wire harness (1) to the engine
wire harness (2) and secure with wire ties.
9.
Feed the rotary screen brush electrical connector
and wire loom (1) and grommet (2) up through the
hole in the radiator frame
NOTE: Removal of the rubber grommet in the radiator
frame hole may be necessary to remove the radiator
screen brush electrical connector.
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 96
7
10010863_851
8
40015960_852
9
10013133_846