6.
Fit the mount (1) (for the F2B engine) or (4), (for
the F3A engine) and tighten the fixing screws to the
required torque.
Connect the oil pipes (2/7) to the mounts (1/4) tight-
ening the fittings to the required torque.
7.
Fit the oil filters (1) on the relevant mounts as follows:
- oil the gaskets;
- screw down the filters until the gaskets come into
contact with the supporting bases;
- tighten the filter to a torque of 35-40 N·m (25-29 ft.
lbs.).
8.
Mount the following with their gaskets and tightening
the screws to the required torque:
- fuel pump (2);
- mount (3) with fuel filter (4) and pipes (1);
- connect the pipes (1) to the fuel pump (2).
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 126
7
MID0370A
8
MID0371A
9
MID0372A