New Holland CX720 Repair Manual page 1670

ENGINE - Complete (B.10.A - F.20.A.10)
CX860, CX880
1. Mount the rocker arm cover (1) and the timing sys-
tem cover (2) with new gaskets, tightening the fixing
screws to the required torque.
NOTE: The fixing screws of the rocker arm cover, 1, must
be tightened in the sequence shown in the diagrams on
page 26.
2. Mount the suction hose (1) and tighten the fixing
screws to the required torque.
3. Place the gasket (4) on the oil sump (1) position the
spacer (3) and fit the sump on the crankcase screw-
ing down the screws (2) to the required torque.
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 124
1
MID0364A
2
MID0365A
3
MID0366A