New Holland CX720 Repair Manual page 1674

12. Mount the following, tightening the screws to the re-
quired torque:
- mounts (1) ;
- alternator (2) ;
- for the F2B engine only, the mount (4) and the su-
percharger (3) .
13. F2B engine only
With a suitable tool (6) operate the tightener (5) in the
direction of the arrow and fit the belt (4).
Both engines
With a suitable tool (3) operate the tightener (2) in the
direction of the arrow and fit the belt (1).
NOTE: The tighteners are automatic, so no further adjust-
ments are required after assembly.
14. Put the tool 296011 on the engine lifting hooks, fasten
this on the hoist.
Remove the screws fixing the brackets:
- 296196 for the F2B engine;
- 296197 for the F3A engine;
to the rotary stand, lift the engine and disconnect the
above-mentioned brackets. Complete assembly of
the engine with the following parts and tighten the
fixing screws or nuts to the required torque:
- fit the drive (1);
- fit the engine mounts;
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 128
13
MID0376A
14
MID0377A
15
MID0380A