New Holland CX720 Repair Manual page 1610

36. Unscrew the screws (2) fixing the connecting rod cap
(3), and remove it.
From the top, take out the piston connecting rod as-
sembly (1). Repeat the same operations for the other
pistons.
NOTE: Keep the connecting rod half bearings in their hous-
ings and/or note their assembly position since, if they are
to be reused, they will need to be fitted in the same position
found in disassembly.
37. Using an appropriate wrench and a hex wrench un-
screw the screws (1) and (2), and remove the sub-
crankcase (3).
NOTE: Note down the assembly position of the top and
bottom main bearing shells since, if they are to be reused,
they will need to be fitted in the same position found in
disassembly.
38. Using tool 293273 (1), remove the crankshaft (2).
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 64
36
MID0312A
37
MID0313A
38
MID0314A