33.
Install the step assembly (1) with the attached
crankcase vent filter (2) and oil filter manifold (3) to
the engine and floor. Install and tighten the mounting
hardware (4).
Connect the oil tubes (5) to the oil filter manifold (3),
and tighten the fittings (6).
34.
Connect the hoses (1) to the oil separator (2) and
ventilation tube (3) Tighten the hose clamps (4).
35.
Connect the oil hose (1) to the bottom of the
crankcase vent filter (2) and secure with the hose
clamp (3) Tighten the hose clamp.
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 118
33
10013110_813
34
10013110_814
35
10013139_815