Crankshaft - Repair (B.10.A.43 - F.10.A.32)
CX860, CX880
Handle all parts carefully. Do not put your hands or fingers between parts. Always wear suitable safety items
such as fitted clothing, safety goggles, gloves, shoes, etc. M954
1.
Measuring main journals and crankpins
Before grinding the pins, measure the pins of the
shaft (2) with a micrometric gauge (1) and establish,
depending on the level of undersizing of the bear-
ings, to what diameter you need to reduce the pins.
The classes of undersizing are 0.127 -0.254 - 0.508
mm ( 0.0050 - 0.0100 - 0.0200 in).
It is advisable to note down the measurements in a
table Fig.2
NOTE: All the main journals and crankpins should always
be ground to the same class of undersizing so as not to
alter the balance of the crankshaft.
POWER PRODUCTION - ENGINE
CAUTION
2
MID0393A
2 4/7/2006
B.10.A / 173
1
MID0392A