4.
Align the rear mounting holes and install the mount-
ing bolt (1) and washer (2).
Tighten and torque the front engine mounting nuts to
217 N·m (160 ft. lbs.)
Tighten and torque the rear engine mounting bolts to
240 N·m (177 ft. lbs.)
5.
Connect the main starter cable (1) to the starter so-
lenoid (2), and secure with the nut (3).
6.
Remove the plug from the oil pan (1) and connect the
two oil hoses (2) to the oil pan. Secure with the banjo
bolt (3).
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 108
4
10013138_785
5
10013130_786
6
10010863_787