New Holland CX720 Repair Manual page 1711

4. Coat liners with oil and install crankshaft.
5. Install a thrust bearing cap with flange type bearing
first, installing remaining bearing caps to their original
location and tightening finger tight.
6. Tighten the main bearing caps in two stages:
Stage 1, tighten all bolts to a torque of 81 Nm (60 ft.
lb. ).
Stage 2, using a torque angle gauge tighten all bolts
a further 90 °in a single stroke.
POWER PRODUCTION - ENGINE
2 4/7/2006
B.10.A / 165
4
6010065
5
396-E-9
6
6010069_776