Honda Acura NSX 1991 Service Manual page 1280

Cruise Control
-Control Unit Input Test
CAUTION:
ALL SRS electrical wiring harnesses are covered with
yellow outer insulation.
Replace the entire affected SRS harness assembly
if there is an open circuit or damage to the wiring.
Remove the glove box, then disconnect the 14-P con-
nector from the control unit. Make the following tests
at harness pins:
NOTE: Recheck the connections between the 14-P con-
nector and the control unit, then replace the control unit
if all input tests prove OK.
WHT GRN BLK
23-296
SRS MklN WIRE HARNESS
CRUISE
CONTROL
wire side