Assembly And Preparation; Selecting And Connecting Patient-Specific Accessories - Dräger Atlan Quick Reference Manual

Fault
Complete device fail-
ure
2

Assembly and preparation

medical device requires full understanding and strict observation of the instructions for use.
2.1

Selecting and connecting patient-specific accessories

2.1.1 Fitting the breathing circuit and the filters
The device can be used with Infinity ID breathing hoses or conventional breathing hoses. If
no leakage test has yet been performed after switching on the device, hose compliance and
hose resistance will automatically be adopted when Infinity ID breathing hoses are
connected.
1. Select suitable accessories for the respective patient category.
|
Quick reference guide
The quick reference guide does not replace the instructions for use. Any use of the
Tidal volume >700 mL
Breathing bag
Breathing cir-
cuit
Filter
Atlan SW 2.0n
Safety function
If backup manual mode is activated:
– Manual ventilation or spontaneous breathing possible
– Emergency O delivery (electronically controlled gas mixer)
2
or fresh-gas delivery (mechanically controlled gas mixer)
available
– Anesthetic agent delivery from connected vaporizers possi-
ble
Adults
301 to 700 mL
3 L 2 L
Adults
Filter or HMEF
Assembly and preparation
Pediatric Neonates
patients
50 to 300 mL <50 mL
1 L 0.5 L
Pediatric Neonates
(or pediatric)
Use an HME or a
filter with low
resistance and
compliance.
Observe the fol-
lowing informa-
tion: "Permissible
hose configura-
tions", page 16.
15