7.3
ADJUSTING THE 1ST TRANSFER TURN-TABLE
The transfer turn-table (1) includes two overlapping wheels.
The clearance between the cap and guides (2) can be modified by loosening the three fixing screws and moving one
in relation to the other.
The height of the cover (3) can be adjusted. It should be 0.7 - 0.8 mm from the top of the cap. These adjustments are
made during machine testing as they are strictly related to the dimensions of the cap.
FIGURE 7.3 - 1ST TRANSFER TURN-TABLE
1
1
Turn-table
2
Guide
3
Cover
Revision 01 Date 14.11.2001
3
176.12
ADJUSTMENTS
2
2
.A03
7
T0632
7 - 13