Safety Rules For Handling; Lifting Procedures; Handling Procedures; Placing The Load - Sacmi PMV 224 Maintenance And Operation Manual

3.2

SAFETY RULES FOR HANDLING

WARNING!
E0004P
3.2.1

LIFTING PROCEDURES

To safely and correctly lift the machine always:
- use the most suitable lifting equipment with an adequate lift capacity;
- cover all sharp edges with cloths and/or cardboard;
- make sure the safety device for the lift hook works properly;
Before lifting:
- make sure all personnel is safely away and that no one can enter the area where the machine is being moved
- make sure the load is stable
- lift the load vertically and gradually in order to avoid banging the parts.
3.2.2

HANDLING PROCEDURES

During handling operations, the load must remain on a perfectly horizontal plane whatever the type of equipment being
used.
To facilitate the lifting and handling operations use bars, levers and ramps from a safe distance. Never use your hands.
The person in charge must:
- have a clear view of where the machine is to be moved
- give instructions to the crane operator from a position where he/she can be clearly seen
- stop the operation immediately if dangerous conditions arise.
3.2.3

PLACING THE LOAD

Before placing the machine make sure the floor is perfectly level and is able to support the weight of the machine.
Do not place the loads in areas where they could create a hazard, prevent the use of equipment or obstruct emergency
exits.
The machine must be placed so that it is stable and the slings can be easily removed.
Do not place worn containers or those with protruding parts on top of each other.
Do not stack material to a dangerous height.
Revision 01 Date 14.11.2001
SAFETY EQUIPMENT AND PRECAUTIONS
176.12
.A03
3
3 - 3