Intended, Prohibited Use And Misuse Of The Machine - Sacmi PMV 224 Maintenance And Operation Manual

176.12
.A03
2 MAIN FEATURES
2.1.2

INTENDED, PROHIBITED USE AND MISUSE OF THE MACHINE

INTENDED USE OF THE MACHINE
The machine described in this manual is specifically designed to manufacture products with the characteristics
indicated in the specifications.
The machine operates safely if:
- it is used under the operating conditions and within the limits indicated in this paragraph;
- it is regularly serviced at the correct time intervals as described in Chapter 8 - MAINTENANCE;
- it is used properly by following the directions given in Chapter 6 - OPERATING INSTRUCTIONS.
WARNING!
E0004P
If the machine is remote controlled, it is the customer's responsibility to provide the operators with adequate
training.
The machine can operate in two modes:
- manual;
- automatic.
To enable the desired mode of operation, use the relevant selector switch located on the control panel.
UNINTENDED AND PROHIBITED OPERATIONS
No other tasks except those specified by the Manufacturer are to be performed. For this reason, the Manufacturer shall
not be held responsible for the consequences deriving from the failure to observe the instructions contained herein.
MISUSE
The manufacturer shall not be held responsible for any injury to persons or damage to the machine deriving from
incorrect use of the machine. Generally speaking, the most common causes of incorrect use are listed below:
- personnel not adequately trained to perform the required operations
- fatigue (above all during the night shift) or distraction
- carelessness or bad habits.
Remember that the machine is to be controlled and run exclusively by expert and well-trained personnel who are able
to:
- correctly operate the machine under normal conditions
- and, above all, cope with any emergencies!
2 - 10
Revision 01 Date 14.11.2001