Installation; General Rules - Sacmi PMV 224 Maintenance And Operation Manual

176.12
.A03
SAFETY EQUIPMENT AND PRECAUTIONS
3
3.3

INSTALLATION

WARNING!
E0004P
3.3.1

GENERAL RULES

Install the machine by following the instructions provided by the Manufacturer and observing the safety regulations
in force in your country.
It is extremely important that the machine is properly connected to adequate earth electrodes.
Make sure there is enough space around the machine so that it can be operated and serviced easily.
The area surrounding the machine must always be kept free of obstacles, clean, dry and well-lit.
The lighting in the areas around the machine and, in particular, in the work zone should be efficient and have a level
of illumination not less than 300 lux.
The customer must make sure that fire-fighting equipment is provided in the area where the machine is installed and
that there is a system for protection against voltage fluctuation in the electricity supply line. These must conform to laws
currently in force in the country where the machine is installed.
SACMI shall not be held responsible for any property damage or personal injury resulting from improper installation.
3 - 4
Revision 01 Date 14.11.2001