5.5
STARTING AN AUTOMATIC CYCLE
(References given in figure 6.1)
CONDITIONS
- The machine should be energised and at the correct operating temperature.
- The guards should be closed.
- Turn the mode selector on the control panel to the AUT position.
- Start the automatic work cycle by pressing key 1 at the same time as key 28.
5.6
SUBSEQUENT START-UP PROCEDURES
- Perform the operations described in the paragraph OPERATIONS TO BE PERFORMED BEFORE STARTING THE
PRODUCTION CYCLE.
Revision 01 Date 14.11.2001
176.12
.A03
START-UP
5
5 - 3