Operator Training; End-User; Operators; Maintenance Staff - Sacmi PMV 224 Maintenance And Operation Manual

3.4

OPERATOR TRAINING

WARNING!
E0004P
3.4.1

END-USER

The company using this equipment must see that their personnel:
- match the requirements listed below
- read and understand the manual in its entirety
- are adequately instructed and trained on how to safely carry out their tasks
- receive specific training on how to operate this machine correctly.
3.4.2

OPERATORS

The machine operator must:
- understand the technology employed and have specific experience in operating this type of machine
- be well educated enough to read and fully understand the contents of this manual as well as properly interpret the
drawings provided
- know all the safety rules and standards
- general (hygiene and on-the-job safety, accident prevention)
- specific (for the type of product handled by the machine)
in force in the country where the machine is installed.
Operator tasks
The operator is only authorised use the controls and instruments provided on the machine's control panel.
3.4.3

MAINTENANCE STAFF

The maintenance staff must be selected according to the same criteria as that indicated for the operators.
In addition, they must be trained in specific technological areas (mechanical, electric, pneumatic etc.) so that they can
carry out the operations they are responsible for (as specified in the manual) in complete safety using suitable tools
and equipment.
Tasks for the maintenance staff
The maintenance staff are responsible for carrying out the routine maintenance operations described in this manual.
It is important that the members of staff carry out only the tasks in the areas they are specifically responsible for
(mechanical, electric, pneumatic, etc.).
Revision 01 Date 14.11.2001
SAFETY EQUIPMENT AND PRECAUTIONS
176.12
.A03
3
3 - 5