Operating Instructions; Control Keyboard - Sacmi PMV 224 Maintenance And Operation Manual

6

OPERATING INSTRUCTIONS

6.1

CONTROL KEYBOARD

The keyboard is used by the operator to control the machine and monitor operations.
It is located on a stand and is designed so that the operator can move it around the machine and place it in the most
suitable position.
A microprocessor-based programmable logic controller is provided. The following operations can be performed by
using the controls on the keyboard.
- the work cycle can be set.
- the operating data can be entered or changed even when the work-cycle is in progress.
- messages and settings can be displayed.
- the operating data for the selected work-cycle can be stored and retrieved.
- self-diagnosis.
- maintenance checks.
IMPORTANT!
E0004
All information about how to program and use the controller are given in Instructions Manual B - Use of the
microprocessor control system.
Revision 01 Date 14.11.2001
OPERATING INSTRUCTIONS
176.12
.A03
6
6 - 1