Forming Cam Cooling Lines; Auxiliary Circuit Cooling Tank - Cooling Tank And Plunger Heater - Sacmi PMV 224 Maintenance And Operation Manual

176.12
.A03
INSTALLATION
4
4.3.1.3

Forming cam cooling lines

The two hoses marked with the numbers 7 (delivery) and
8 (return) that run from manifolds M and R of the extruder
are found beneath the extruder base. Those running from
the points of use are found beneath the drum base.
- Connect the hoses together by referring to the
identification numbers stamped on them.
4.3.1.4 Auxiliary circuit cooling tank - cooling tank
and plunger heater
- Fill the tanks to the level indicated (B) by pouring the
cooling fluid in through the filler provided (A).
NOTE:
- The specifications of the cooling fluid are detailed in
chapter 2 - MAIN FEATURES .
- The cooling tank for the auxiliary circuit is shown as
an example in the diagram.
4 - 10
Revision 01 Date 14.11.2001
FIGURE 4.3.1.3
FIGURE 4.3.1.4
T0388
M R
•
•
B
T0387
A