Infeed Turn-Table - Sacmi BTA 900 Instruction Manual

166.07
.A02
ADJUSTMENTS
7
7.2

INFEED TURN-TABLE

(references in figure 7.2)
SIZE CHANGE-OVER
Some parts of the unit need to be replaced when different sized caps are to be handled. Use the crank provided to
move the infeed turn-table away from the work drum.
REPLACING THE CAVITY
Remove the screw (11), take out the cavity (4) and replace it (repeat this operation for each cavity).
WARNING!
E0004P
Take care not to damage the O-rings on the screw (11). If they are damaged replace them immediately.
REPLACING THE WHEEL
Remove the screws (12), take off the wheel (3) and replace it.
WARNING!
E0004P
Once the operations have been completed, bring the infeed turn-table back to its initial position.
7 - 4
Revision 00 Date 18.10.1998