176.12
.A03
SAFETY EQUIPMENT AND PRECAUTIONS
3
3.1.2.4
Emergency stop buttons
Emergency stop buttons on board the machine
These are located in the positions indicated in the illustration below.
- Operation: manual
- Action: the drive system and machine motors, except those for the vacuum and suction pumps (required to transport
the product) stop immediately. Power to the auxiliary electric system and solenoid valve control system is cut off.
- Reset: from control panel, turn the button to release it.
Emergency stop button on the control panel
This is located on the control panel in the position indicated in the illustration.
- Operation: manual
- Action: the drive system and machine motors, except those for the vacuum and suction pumps (required to transport
the product) stop immediately. Power to the auxiliary electric system and solenoid valve control system is cut off.
- Reset: from control panel, turn the button to release it.
FIGURE 3.1.2.4 - LOCATION OF THE EMERGENCY STOP BUTTONS
3 - 2
Revision 01 Date 14.11.2001
T2452