Plastic Compound Feeder And Hopper - Sacmi PMV 224 Maintenance And Operation Manual

4.2.3 PLASTIC COMPOUND FEEDER AND
HOPPER
- Mount the plastic compound hopper (8) over the extruder
flange (2).
- Secure it with the screws (A).
- Install the plastic compound feeder (9) over the hopper
(8).
- Secure it with the screws (B).
NOTE: The plastic compound feeder is an optional
extra.
Revision 01 Date 14.11.2001
FIGURE 4.2.3/A - PLASTIC COMPOUND FEEDER
AND HOPPER
FIGURE 4.2.3/B - PLASTIC COMPOUND FEEDER
AND HOPPER
3
T0372
176.12
INSTALLATION
2
3 - 4
1
4
2
.A03
4
T2439
B
A
4 - 7