Safety Precautions For Operating, Adjusting And Servicing The Machine; General Safety Rules - Sacmi PMV 224 Maintenance And Operation Manual

176.12
.A03
SAFETY EQUIPMENT AND PRECAUTIONS
3
3.5 SAFETY PRECAUTIONS FOR OPERATING, ADJUSTING AND SERVICING THE
MACHINE
3.5.1

GENERAL SAFETY RULES

E0001
Never inspect, repair or service moving parts. Clear warning signs should be attached near the parts in question to
warn operators of the danger.
E0007
E0010
Before performing any operation on the machine, including the replacement of components of the control panel or
electrical cabinet, the maintenance staff must shut off the electricity supply by using the main switch located on the
control panel. This switch should then be locked in position by using a padlock so that the machine cannot be
accidentally started up.
The electrical cabinet can be accessed even when the system is energised.
As laid down by the EN 60204-1 directive, access to the electrical cabinet should only be possible with a special key.
This key should be kept by one member of staff qualified and trained to work on live parts.
When the electrical cabinet is energised, the only task that this member of staff should perform is to reset the circuit
breakers.
E0017
When working on the machine never climb up on any part other than the service floor or ladders. The machine guards
and enclosing barriers are not designed to bear the weight of a person. If climbed on, they may collapse causing injury
to personnel and damage to the machine.
E0004P
It may be necessary to temporarily remove or disable certain safety devices when making adjustments or servicing
the machine. Once these operations have been completed, it is highly important that the safety devices are put back
in place and reactivated before the machine is started up.
E0005
E0002
During operations, the electric motors can reach extremely high temperatures which would cause burning if touched.
Always take the necessary safety precautions before working on the motors.
E0009
E0007
In order to ensure that the machine operates efficiently, safely and in a trouble-free manner always follow SACMI's
instructions carefully. Carry out the scheduled maintenance operations exactly as described and at the time intervals
recommended.
In particular, regularly check all the safety devices for proper functioning. Also check the insulation of the electrical
cables and replace if necessary.
3 - 6
Revision 01 Date 14.11.2001