Discharge Unit; Exit Conveyor Belt - Sacmi PMV 224 Maintenance And Operation Manual

2.1.1.7

Discharge unit

This unit is used to transfer the caps from the quality control unit to the exit conveyor belt.
2.1.1.8

Exit conveyor belt

The exit conveyor belt receives the products from the discharge unit and carries them in an orderly manner to the area
where they enter the next machine in-line.
Solenoid valve YV4 sees that any defective products are ejected into the relative conveyor (1).
Sample caps can be obtained through the conveyor (2) by pressing the relative button on the belt to activate solenoid
valve YV11.
The air-operated diverter (3) allows the flow of outgoing caps to be directed as required with the aid of the conveyor
(4).
FIGURE 2.1.1.8 - EXIT CONVEYOR BELT
1
Revision 01 Date 14.11.2001
YV4
4
176.12
MAIN FEATURES
YV11
3
.A03
2
2
T2459
2 - 7