Ethernet Setup Menu - Cisco 8961 Administration Manual

Ethernet Setup menu

Related Topics
Display Setup Menu, on page 102
Password Protection, on page 103
Ethernet Setup menu, on page 104
Wireless Setup menu, on page 108
IPv4 Setup Menu Options, on page 113
Basic Reset, on page 290
Ethernet Setup menu
The Ethernet Setup menu provides options for viewing and changing a variety of network settings. The
following table describes these options and, where applicable, explains how to change them.
Establishing a VPN connection overwrites the Ethernet data fields.
Note
Table 15: Ethernet Setup menu options
Option
IPv4 Setup
IPv6 Setup
MAC Address
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
104
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
In the IPv4 Setup configuration
submenu, you can do the following:
For more information about the IPv4
address fields, see
Options, on page
IPv6 address of the phone.
This option display only when the
phone is configured in IPv6-only
mode or in dual-stack mode.
For more information about the IPv4
address fields, see
fields, on page
Unique Media Access Control
(MAC) address of the phone.
• Enable or disable the phone to
use the IP address that the
DHCP server assigns.
• Manually set the IP Address,
Subnet Mask, Default Routers,
DNS Server, and Alternate
TFTP servers.
IPv4 Setup Menu
113.
IPv6 Setup menu
120.
Cisco Unified IP Phone Settings
To change
Scroll to IPv4 Setup and press
Select.
Scroll to IPv6 Setup and press
Select.
Display only. Cannot configure.