Cisco 8961 Administration Manual page 252

Status Messages Screen
Procedure
Step 1
Press Applications
Step 2 Select Administrator Settings.
Step 3
Select Status.
Step 4 Select Status Messages. See
Step 5 To remove current status messages, press Clear List.
Step 6 To exit the Status Messages screen, press Exit.
Status Messages
The following table describes the status messages that display on the Status Messages screen of the phone.
Table 43: Status messages on the Cisco Unified IP Phone
Message
CFG TFTP Size Error
Checksum Error
CTL and ITL installed
CTL Installed
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
228
REVIEW DRAFT - CISCO CONFIDENTIAL
.
Status Messages, on page 228
Description
The configuration file is too large
for file system on the phone.
Downloaded software file is
corrupted.
The CTL and ITL files are installed
on the phone.
A certificate trust list (CTL) file is
installed in the phone.
Model information, status, and statistics
for a description of the status messages.
Possible explanation and action
Power cycle the phone.
Obtain a new copy of the phone
firmware and place it in the
TFTPPath directory. You should only
copy files into this directory when the
TFTP server software is shut down;
otherwise, the files may be corrupted.
None. This message is informational
only. Neither the CTL file nor the ITL
file was installed previously.
For more information about the trust
list, see Cisco Unified
Communications Manager Security
Guide.
None. This message is informational
only. The CTL file was not installed
previously.
For more information about the CTL
file, see the Cisco Unified
Communications Manager Security
Guide.