Cisco Unified Ip Phone And Cisco Unified Communications Manager Express; Interaction; Cisco Unified Ip Phone Power - Cisco 8961 Administration Manual

Cisco Unified IP Phone and telephony networks

Cisco Unified IP Phone and Cisco Unified Communications Manager Express

Interaction

When the Cisco Unified IP Phone works with the Cisco Unified Communications Manager Express (Unified
CME), the phones must go into CME mode.
When a user invokes the conference feature, the tag allows the phone to use either a local or network hardware
conference bridge.
The Cisco Unified IP Phones do not support the following actions:
Transfer
Conference
Join
Hold
Barge
Direct Transfer
Select
The users cannot create conference and transfer calls across different lines.

Cisco Unified IP Phone Power

The Cisco Unified IP Phone 8961, 9951, and 9971 can be powered with external power or with Power over
Ethernet (PoE). A separate power supply provides external power. The switch can provide PoE through the
phone Ethernet cable.
When you install a phone that is powered with external power, connect the power supply to the phone
Note
and to a power outlet before you connect the Ethernet cable to the phone. When you remove a phone that
is powered with external power, disconnect the Ethernet cable from the phone before you disconnect the
power supply.
Cisco Unified IP Phone and Cisco Unified Communications Manager Express Interaction
REVIEW DRAFT - CISCO CONFIDENTIAL
Only supported in the connected call transfer scenario.
Only supported in the connected call transfer scenario.
Supported using the Conference button or Hookflash access.
Supported using the Hold button.
Not supported.
Not supported.
Not supported.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
43