Ethernet Configuration Menu - Cisco 7962G Administration Manual

Device Configuration Menu

Ethernet Configuration Menu

The Ethernet Configuration menu includes the options that are described in
Table 4-11 Ethernet Configuration Menu Option
Option Description
Span to PC Port Indicates whether the phone will
forward packets transmitted and
received on the network port to the
access port.
Enable this option if an application that
requires monitoring of the phone's
traffic is being run on the access port.
These applications include monitoring
and recording applications (common in
call center environments) and network
packet capture tools that are used for
diagnostic purposes.
Forwarding Indicates whether the internal switch
Delay begins forwarding packets between the
PC port and switched port on the phone
when the phone becomes active.
When forwarding delay is set to
•
disabled, the internal switch begins
forwarding packets immediately.
When forwarding delay is set to
•
enabled, the internal switch waits
eight seconds before forwarding
packets between the PC port and
the switch port.
Default is disabled.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
4-24
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Table 4-11.
OL-12641-01