Cisco 8961 Administration Manual page 30

Cisco Unified IP Phone 8961
6 Navigation pad and Select button
7 Conference button
8 Hold button
9 Transfer button
10 Keypad
11 Speakerphone button
12 Mute button
13 Headset button
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
6
REVIEW DRAFT - CISCO CONFIDENTIAL
The four-way Navigation pad allows you to scroll through menus, highlight items, and
move within a text input field.
The Select button (center of the Navigation pad) allows you to select a highlighted item.
The Select button is lit (white) when the phone is in Power Save or Power Save Plus mode.
Press the Select button to override Power Save and Power Save Plus mode.
Creates a conference call.
Places a connected call on hold and toggles between an active and held call.
Transfers a call.
Allows you to dial phone numbers, enter letters, and choose menu items by entering the
item number.
Selects the speakerphone as the default audio path and initiates a new call, picks up an
incoming call, or ends a call. During a call, the button is lit green.
The speakerphone audio path does not change until you select a new default audio path
(for example, by picking up the handset).
If external speakers are connected, the Speakerphone button selects them as the default
audio path.
Toggles the microphone on or off during a call. When the microphone is muted, the button
is lit red. When muted, you can hear the other parties on the call, but they cannot hear you.
Selects the headset as the default audio path and initiates a new call, picks up an incoming
call, or ends a call. During a call, the button is lit green.
A headset icon
audio path. This audio path does not change until you select a new default audio path (for
example, by picking up the handset).
in the phone screen header line indicates that the headset is the default
Cisco Unified IP Phone