Cisco 8961 Administration Manual page 276

Network Setup
Item
Host Name
Domain Name
IP Address
Subnet Mask
TFTP Server 1
TFTP Server 2
Default Router 1
DNS Server 1–3
Operational VLAN
ID
Admin. VLAN ID
CUCM Server 1–5
Information URL
Directories URL
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
252
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
Host name that the DHCP server assigned to the phone.
Name of the Domain Name System (DNS) domain in which the phone resides.
Internet Protocol (IP) address of the phone.
Subnet mask that the phone uses.
Primary Trivial File Transfer Protocol (TFTP) server used that the phone uses.
Backup Trivial File Transfer Protocol (TFTP) server used that the phone uses.
Default router used that the phone uses.
Primary Domain Name System (DNS) server (DNS Server 1) and optional backup
DNS servers (DNS Server 2 and 3) that the phone uses.
Operational Virtual Local Area Network (VLAN) that is configured on a Cisco
Catalyst switch in which the phone is a member.
Auxiliary VLAN in which the phone is a member.
Host names or IP addresses, in prioritized order, of the Cisco Unified Communications
Manager servers with which the phone can register. An item can also show the IP
address of an SRST router that is capable of providing limited Cisco Unified
Communications Manager functionality, if such a router is available.
For an available server, an item shows the Cisco Unified Communications Manager
server IP address and one of the following states:
• Active: Cisco Unified Communications Manager server from which the phone
is currently receiving call-processing services
• Standby: Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable
• Blank: No current connection to this Cisco Unified Communications Manager
server
An item may also include the Survivable Remote Site Telephony (SRST) designation,
which identifies an SRST router capable of providing Cisco Unified Communications
Manager functionality with a limited feature set. This router assumes control of call
processing if all other Cisco Unified Communications Manager servers become
unreachable. The SRST Cisco Unified Communications Manager always appears
last in the list of servers, even if it is active. You configure the SRST router address
in the Device Pool section in Cisco Unified Communications Manager Configuration
window.
URL of the help text that appears on the phone.
URL of the server from which the phone obtains directory information.
Remote Monitoring