Access Web Page For Phone; Cisco Unified Ip Phone Web Page Information - Cisco 8961 Administration Manual

Access Web Page for Phone

Access Web Page for Phone
To access the web page for a Cisco Unified IP Phone, follow these steps:
Note If you cannot access the web page, it may be disabled by default. For more information, see
page access, on page
Procedure
Step 1 Obtain the IP address of the Cisco Unified IP Phone by using one of these methods:
a) Search for the phone in Cisco Unified Communications Manager Administration by choosing Device >
Phone. Phones that register with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
b) On the Cisco Unified IP Phone, press Applications
Setup > Ethernet Setup > IPv4 Setup, and then scroll to the IP Address option.
Step 2 Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco Unified
IP Phone:
http://<IP_address> or https://<IP_address> (depending on the protocol supported by the Cisco Unified IP
Phone)

Cisco Unified IP Phone Web Page Information

The web page for a Cisco Unified IP Phone includes these topics:
• Device Information: Displays device settings and related information for the phone.
• Network Setup: Displays network setup information and information about other phone settings.
• Network Statistics: Includes the following hyperlinks, which provide information about network traffic:
• Device Logs: Includes the following hyperlinks, which provide information that you can use for
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
248
REVIEW DRAFT - CISCO CONFIDENTIAL
249.
◦ Ethernet Information: Displays information about Ethernet traffic.
◦ Access: Displays information about network traffic to and from the PC port on the phone.
◦ Network: Displays information about network traffic to and from the network port on the phone.
troubleshooting:
◦ Console Logs: Includes hyperlinks to individual log files.
◦ Core Dumps: Includes hyperlinks to individual dump files.
◦ Status Messages: Displays the 10 most recent status messages that the phone has generated since
it last powered up.
, choose Administrator Settings > Network
Remote Monitoring
Control web