Security Setup Menu - Cisco 8961 Administration Manual

Cisco Unified IP Phone Settings
The following table describes the address formats.
Format
X:X:X:X:X:X:X:X
Compressed
• To enter a colon (:) in the address, press the asterisk (*) on the keypad.
• To enter hexadecimal digits a, b, and c, press 2 on the keypad, scroll to select the required digit, and
• To enter hexadecimal digits d, e, and f, press 3 on the keypad, scroll to select the required digit, and
• After you enter each part of the address, you press Apply or Revert .
Step 5
Change toggle fields using these steps:
a) If an option is set to No, press Yes to enable it. If the option is set to Yes, press No to disable it.
b) Press Apply to save your change, or Revert to discard it.
Step 6 Press Apply to save your change or press Revert to discard the change.

Security Setup Menu

The Security Setup menu that you access directly from the Administrator Settings menu provides information
about various security settings. The menu also provides access to the Trust List menu and indicates whether
the CTL or ITL file is installed on the phone.
The following table describes the options in the Security Setup menu.
Table 19: Security Setup Menu
Option
Security Mode
REVIEW DRAFT - CISCO CONFIDENTIAL
press Enter.
press Enter.
Description
Displays the security mode that is set
for the phone.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Description
Eight sets of hexadecimal digits separated by colons. Leading or trailing
zeros in each group may be omitted.
Example: 2001:db8:0:0:0:52:0:1
Collapse a single run of consecutive zero groups into a single group
represented by a double colon.
Example: 2001:db8::52:0:1
Security Setup Menu
To change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone. The setting appears in the
Protocol Specific Information portion of
the Phone Configuration window.
(SIP)
123