Cisco 8961 Administration Manual page 250

Model Information Fields
Step 2 To exit the Model Information screen, press Exit.
Model Information Fields
The following table describes the Model Information settings.
Table 42: Model Information settings for the Cisco Unified IP Phone
Option
Model Number
IPv4 Address or
IPv6 address
Host name
Active Load
Inactive Load
Last Upgrade
Active Server
Stand-by Server
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
226
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
Model number of the phone.
IP address of the phone. The address displayed depends
on the IPv6 setup.
Host name of the phone.
Version of firmware currently installed on the phone.
The user can press Details for more information.
Inactive Load appears only when a download is in
progress. A download icon and a status of "Upgrade in
Progress" or "Upgrade Failed" also display. If a user
presses Details during an upgrade, the download
filename and components are listed.
A new firmware image can be set to download in
advance of a maintenance window. Thus instead of
waiting for all of the phones to download the firmware,
the system switches more rapidly between resetting an
existing load to Inactive status and installing the new
load.
When the download is complete, the icon changes to
indicate the completed status; and a check mark displays
for a successful download, or an "X" displays for a failed
download. If possible, the rest of the loads continue to
download.
Date of the most recent firmware upgrade.
Domain name of the server to which the phone is
registered.
Domain name of the standby server.
Model information, status, and statistics
To change
Display only. Cannot
configure.
Display only. Cannot
configure.
Display only. Cannot
configure.
Display only. Cannot
configure.
Display only. Cannot
configure.
Display only. Cannot
configure.
Display only. Cannot
configure.
Display only. Cannot.