Network Setup Menu - Cisco 6921 Administration Manual

Network Setup Menu

•
•
Network Setup Menu
The Network Setup menu provides options for viewing and making a variety of network settings.
Table 4-1
For information about how to access the Network Setup menu, see the
Menu" section on page
For information about the keys you can use to edit options, see the
Table 4-1 Network Setup Menu Options
Option
IPv4 Setup
IPv6 Setup
Host Name
Domain Name
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-4
Unlocking and Locking Options, page 4-3
Network Setup Menu, page 4-4
describes these options and, where applicable, explains how to change them.
4-2.
Description
In the IPv4 Setup submenu, you can do the following:
Enable or disable the phone to use the IP address that
•
is assign by the DHCP server.
• Manually set the IP Address, Subnet Mask, Default
Routers, DNS Server, and Alternate TFTP servers.
For more information on the IPv4 address fields, refer to
Table 4-2.
In the IPv6 Setup submenu, you can do the following:
Enable or disable the phone to use the IPv6 address
•
that is assign by the DHCPv6 server.
• Manually set the IPv6 Address, Subnet Prefix Length,
IPv6 DNS Server, and IPv6 TFTP Servers.
For more information on the IPv6 address fields, refer to
Table 4-3.
Unique host name that the DHCP server assigned to the
phone.
Name of the Domain Name System (DNS) domain in
which the phone resides.
"Displaying a Configuration
"Editing Values" section on page
To Change
Scroll to IPv4 Setup and press
Select.
Scroll to IPv6 Setup and press
Select.
Display only—Cannot configure.
1. Set the DHCP Enabled option to
No.
2. Scroll to the Domain Name
option, press the Edit softkey,
and then enter a new domain
name.
Press the Apply softkey, then
3.
press Save.
Chapter
4-3.
OL-24567-01