Cisco 8961 Administration Manual page 341

Cisco Unified IP Phone Wall Mount
Install Bracket
REVIEW DRAFT - CISCO CONFIDENTIAL
If you are using an external power supply, plug the power cord into the phone and dress the cord by clipping
it into the clips that are incorporated into the phone body next to the PC port.
Figure 8: Attach the Cables
Step 4 Attach the phone to the wall bracket by inserting the tabs on the top of the phone bracket into the slots on the
wall bracket. Ensure that the power cord and any other cable that does not terminate in the wall behind the
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
317