Set Wireless Field; Set Wireless Sign In Access Field - Cisco 8961 Administration Manual

Cisco Unified IP Phone Settings
Option
802.11 Mode
Notes
Consider the following when you select AKM:
1 AKM uses LEAP for 802.1x when WPA, WPA2, or CCKM is in use.
2 AKM selects the encryption method by giving precedence to the strongest key management type and then
the strongest cipher.
3 CCKM is not supported with WPA2.
Related Topics
Display Setup Menu, on page 102
Value Input Guidelines, on page 103

Set Wireless Field

Procedure
Step 1
Scroll to the Wireless option, and use the toggle switch to change the setting between on and off.
Step 2 Press Apply.

Set Wireless Sign in Access Field

Procedure
Step 1
Scroll to the Wireless Sign In option, and use the toggle switch to change the setting between on and off.
Step 2 Press Apply.
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
Specifies the wireless signal standard that is
used in the WLAN. Valid values specify:
• Auto: Default value. Gives precedence
to 5.0 Ghz if available.
• 802.11a
• 802.11b/g
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Set Wireless Field
To change
See Set 802.11 Mode Field, on page
112.
(SIP)
111