Set Device Authentication Field; Set Eap-Md5 Fields - Cisco 8961 Administration Manual

Cisco Unified IP Phone Settings
REVIEW DRAFT - CISCO CONFIDENTIAL
Option
Transaction Status

Set Device Authentication Field

Procedure
Step 1
After pressing Applications
Step 2 Set the Device Authentication option to Enabled or Disabled.
Step 3 Press Apply.

Set EAP-MD5 Fields

Procedure
Step 1
Press Applications
Step 2 Choose Administrator Settings > Security Setup > 802.1X Authentication > EAP-MD5.
Step 3 To change the shared secret, choose Shared Secret.
Step 4 Enter the shared secret.
Step 5
Press Apply.
Description
State: Displays the state of 802.1x authentication:
• Disconnected: Indicates that 802.1x
authentication is not configured on the
phone.
• Authenticated: Indicates that the phone is
authenticated.
• Held: Indicates that the authentication
process is in progress.
Protocol: Displays the EAP method that is used
for 802.1x authentication (can be EAP-MD5,
EAP-FAST or EAP-TLS).
, choose Administrator Settings > Security Setup > 802.1X Authentication.
.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
802.1X Authentication and Transaction Status
To change
Display only. Cannot configure.
(SIP)
127