Cisco 8961 Administration Manual page 133

Cisco Unified IP Phone Settings
REVIEW DRAFT - CISCO CONFIDENTIAL
Table 16: WirelessSetup menu options
Option
Wireless
Wireless Sign in
Access
IPv4 Setup
MAC Address
Description
Turns the wireless radio on Cisco Unified IP
Phone on or off. Valid values specify:
• On: Turns the wireless radio on the
phone on.
• Off: Turns the wireless radio on the
phone off.
Default: On
Enables the display of the Wireless Sign in
Access window in the main Applications
menu:
• On: The Wireless Sign In Access
window displays. Turning this value
on allows you to sign in or change your
Wireless user ID and password on the
main Applications menu. Otherwise,
to change your sign-in information,
navigate down to the Security menu
level and select either the LEAP or
EAP-FAST methods, both of which
require sign-in credentials.
• Off: The Wireless Sign In Access
window does not display.
Default: Off
In the IPv4 Setup configuration submenu,
you can do the following:
• Enable or disable the phone to use the
IP address that the DHCP server
assigns.
• Manually set the IP Address, Subnet
Mask, Default Routers, DNS Server,
and Alternate TFTP servers.
For more information about the IPv4 address
fields, see IPv4 Setup Menu Options, on
page 113.
Unique Media Access Control (MAC)
address of the phone.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Wireless Setup menu
To change
See Set Wireless Field, on page
See Set Wireless Sign in Access Field,
on page 111.
Scroll to IPv4 Setup and press Select.
Display only. Cannot configure.
(SIP)
111.
109