Enable Wideband Codec On Analog Headsets; Wireless Headsets; Find Information On Supported Wireless Headsets - Cisco 8961 Administration Manual

Headsets
REVIEW DRAFT - CISCO CONFIDENTIAL
Procedure
Step 1
On the Cisco Unified IP Phone, press Applications
Step 2 Select Accessories.
Step 3
Highlight the analog headset, then press Setup.
Step 4 Turn wideband on or off for the selected headset by using the on/off toggle.

Enable Wideband Codec on Analog Headsets

If the wideband on/off toggle is not enabled, follow these steps to ensure that the user can enable wideband
codec on an analog headset:
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 In the Find and List Phones window, enter the search criteria for the phone to which you want to add the
analog headset, then click Find.
Step 3 Click on the Device Name that you want. The Phone Configuration window displays.
Step 4 On the Product Specific Configuration Layout portion of the Phone Configuration window, ensure that the
Wideband Headset UI Control option is enabled. (This option is enabled by default.)
Step 5
In the Product Specific Configuration Layout portion of the Phone Configuration window, you can also set
the Wideband Headset option. (This option is also enabled by default).

Wireless Headsets

You can use a wireless headset with the Cisco Unified IP Phone.

Find Information on Supported Wireless Headsets

The Cisco website provides information about wireless headsets that work with your IP phone.
Procedure
Step 1 Go to the following URL:
http://www.cisco.com/en/US/partner/prod/voicesw/ucphone_headsets.html
Step 2 See the wireless headset documentation for information about connecting the headset and using the features.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
62
Cisco Unified IP Phone Installation
.