Cisco 8961 Administration Manual page 333

Basic Phone Administration Steps
• Password and Confirm Password - Enter five or more alphanumeric or special characters for the end
• Last Name: Enter the end user last name. You may use the following special characters: =, +, <, >, #, ;,
• Telephone Number: Enter the primary directory number for the end user. End users can have multiple
Step 3 Click Save.
Step 4 Proceed to
Phone Setup
To configure the phone, you must first identify the phone and then configure it by using the following
procedures.
Identify phone
To identify the user phone model and protocol, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Select Add New.
Step 3 Select the user phone model from the Phone Type drop-down list, and select Next.
The Phone Configuration window appears. On the Phone Configuration window, you can use the default
values for most of the fields.
Set up Phone Fields
To configure the required fields and some key additional fields, follow these steps:
Procedure
Step 1
For the required fields, possible values (some of which are based on the example of user johndoe) can be
configured as follows:
a) In the Device Information pane of this window:
REVIEW DRAFT - CISCO CONFIDENTIAL
user password. You may use the following special characters: =, +, <, >, #, ;, \, , "", and blank spaces.
\, , "", and blank spaces. Example: doe
lines on their phones. Example: 26640 (John Doe's internal company telephone number)
Phone Setup, on page
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
309.
Phone Setup
(SIP)
309