Cisco 8961 Administration Manual page 101

Cisco Unified IP Color Key Expansion Module Setup
REVIEW DRAFT - CISCO CONFIDENTIAL
Procedure
Step 1 Open a CLI.
Step 2 Enter the following command to enter debug mode:
debugsh
Step 3 Enter ? to see all available commands and options.
Step 4 Use the applicable commands and options to find the desired KEM information.
Step 5 To exit debug mode, press Ctrl-C.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Troubleshoot the KEM
(SIP)
77