Cisco 8961 Administration Manual page 156

Telephony features available for Cisco Unified IP Phone
Feature
Anonymous Call Block
Any Call Pickup
Answer (oldest call)
Assisted Directed Call Park
Assured Services for SIP Lines
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
132
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
Allows a user to reject calls from anonymous callers.
Allows users to pick up a redirected call via the CTI
application, on any line in their call pickup group,
regardless of how the call routed to the phone.
Allows a user to answer the oldest call that is available
on all line appearances on the user phone, including
Hold Reversion and Park Reversion calls that are in an
altering state.
Lets the end user press only one button to direct-park
a call. Requires that you configure a BLF Directed Call
Park button. Then, when the user presses an idle BLF
Directed Call Park feature button for an active call, the
active call is immediately parked at the Dpark slot that
associates with the Directed Call Park feature button.
Offers users the following enhancements:
• A highly secure call flow for Cisco IP Phones and
third-party telephones.
• The option to place priority calls and, if necessary,
preempt lower-priority phone calls through the
use of Multilevel Precedence and Preemption
(MLPP) service and DSCP tagging.
• Support for Conference Factory on third-party
phones.
This feature uses Transport Layer Security (TLS) and
Secure Real-time Transport Security (SRTP) protocols
to ensure security on Cisco and third-party phones.
The feature also introduces Early Offer and V.150
capability for Cisco and third-party phones.
Features, Templates, Services, and User Setup
Configuration Reference
For more information, see "SIP Profile
Configuration" chapter in the Cisco
Unified Communications Manager
Administration Guide.
For more information, see the "Call
Pickup" chapter in Cisco Unified
Communications Manager Features and
Services Guide.
No configuration required other than to
make this a programmable feature button.
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide,
"Configuring Directed Call Park" chapter.
For more information, see Assured
Services for SIP Lines, on page 191.