Create Feature Control Policy; Feature Control Policy Default Values - Cisco 8961 Administration Manual

Features, Templates, Services, and User Setup

Create Feature Control Policy

To create a Feature Control Policy, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Feature
Control Policy.
The Find and List Feature Control Policy window displays.
Step 2 Click Add New to define a set of policies.
Step 3 Enter the following settings.
• Name: Enter a name for a new Feature Control Policy
• Description: Enter a description.
• Feature Control Section: Check the check box for the features for which you want to change the default
Step 4 Click Save.
Step 5
Apply the policy to the phone by including it in the following windows:
• Enterprise Parameters Configuration: Applies to all phones in the system.
• Common Phone Profile Configuration: Applies to all phones in a group.
• Phone Configuration: Applies to an individual phone.

Feature Control Policy Default Values

The following table lists the features that a Feature Control Policy can control and their default values.
Table 27: Feature Control Policy Default Values
Feature
Forward All
Park
To Voicemail
Conference List
Speed Dial
REVIEW DRAFT - CISCO CONFIDENTIAL
setting. See Feature Control Policy Default Values, on page 179
configured and the default value.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Create Feature Control Policy
for the list of features that can be
Default value
Enabled
Disabled
Disabled
Enabled
Enabled
(SIP)
179